What's next?
Thread Starter
Le Mans Master
Joined: Apr 2002
Posts: 5,027
Likes: 0
From: mahopac ny
What's next?
I've done the obligatory exaust and air intake. So what is my next move? Reading this forum is like looking at a chinese menu, everything looks good but too many choices. I have a 02 6 speed coupe and will do some road courses this year. I place myself in your capable hands. Thanks
Safety Car
Joined: Nov 1999
Posts: 3,891
Likes: 2
From: Houston, TX
Re: What's next? (INTRUBL)
Let me look into my crstal ball and I see headers in the future.
Which ones?? I'm sure you will get plenty of suggestions.
Congratulations on the mods and good luck sorting through the information you are about to get. :cool:
Which ones?? I'm sure you will get plenty of suggestions.
Congratulations on the mods and good luck sorting through the information you are about to get. :cool:
Melting Slicks
Joined: May 2001
Posts: 2,456
Likes: 8
From: Cockeysville Maryland
Cruise-In IV Veteran
Daytona Jam 1 Veteran
Re: What's next? (INTRUBL)
For handling I would suggest a sway bar upgrade, Z06, Z51 or what I have, the Hotchkis package.
For power I suggest porting the heads and bigger rear, 3.73s, 3.90s or even 4.10s.
You may need some stickier tires too.
Best of luck with your mods.
Chuck
For power I suggest porting the heads and bigger rear, 3.73s, 3.90s or even 4.10s.
You may need some stickier tires too.
Best of luck with your mods.
Chuck
Drifting
Joined: Feb 2002
Posts: 1,765
Likes: 0
From: Los Angeles Founder, West Coast Corvette Challenge
Re: What's next? (OliverM5)
If you are going to race on circle/auto-x tracks then you will likely experience some potential problems with overheating the engine and the tranny. I would STRONGLY recommend that you consider a heavy duty radiator like MMS offers AND I would also recommend a heavy duty tranny cooler (e.g. B&M 28000). I would also recommend stainless lines with AN fittings.
Once you have done the above then you can pretty much modify the engine and tranny at will and know that you are doing everything you can to prevent or at least reduce excessive heat that could hurt one or both. I did the opposite of what I am recommending to you and got away with it. If I had to do it all over again, I would have actually upgraded the cooling system BEFORE I did any other mods, just for the peace of mind. I realize that this isn't the "sexiest" recommendation you will get in this thread, but it may be one of the more helpful IF as I suspect, you may wind up becoming another member of Mod Aholics Anonymous! :D :hurray: :lol: :chevy :thumbs:
Gary
Once you have done the above then you can pretty much modify the engine and tranny at will and know that you are doing everything you can to prevent or at least reduce excessive heat that could hurt one or both. I did the opposite of what I am recommending to you and got away with it. If I had to do it all over again, I would have actually upgraded the cooling system BEFORE I did any other mods, just for the peace of mind. I realize that this isn't the "sexiest" recommendation you will get in this thread, but it may be one of the more helpful IF as I suspect, you may wind up becoming another member of Mod Aholics Anonymous! :D :hurray: :lol: :chevy :thumbs:
Gary
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
