Cam question inside! Motor gurus help please
Thread Starter
Burning Brakes
Joined: Jun 2002
Posts: 835
Likes: 21
From: Mooresville NC
Cam question inside! Motor gurus help please
I am probably going to be installing a 230/226 561 112 in my car. Question is has anyone used a similar type cam and what should I set my rev limiter at when I get it programmed? TIA
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Re: Cam question inside! Motor gurus help please (99NassauVette)
I will assume with those cam specs you are doing heads ? I would imagine you will upgrading the springs as well. As a baseline I would say around the 6500 rpm mark if you have a stock bottom end. The best way to tell is to dyno the car and see where the hp curve flattens out. Alot of this will be how the heads flow and work with the cam. :seeya :seeya
