Wire turn signal .... !!! ❓
Thread Starter
Racer
Joined: May 2021
Posts: 384
Likes: 52
Wire turn signal .... !!! ❓
hi... Did anyone he knows or how lcan get the power from the turn signal. ? l need to do some work that requires power only from the turn signal when they works left or right ? .. l was going to get it from taillights but as we know they are dual working with brakes lights same power line ... My custom project need to be works and powered only with turn signals left and right ...any idea ?
Last edited by link9a; May 4, 2025 at 08:46 PM.
Racer
Joined: Sep 2009
Posts: 464
Likes: 160
From: Port Birmingham AL
Do you want a steady output, or a pulsing one, like the turn signals?
Also, the front turn signals and the DRLs share the same wire (and bulb filament), so you would probably want to get the output
off the rear turn signals.
Also, the front turn signals and the DRLs share the same wire (and bulb filament), so you would probably want to get the output
off the rear turn signals.
Tech Contributor
Joined: Jan 2007
Posts: 19,394
Likes: 1,136
From: Dyer, IN
hi... Did anyone he knows or how lcan get the power from the turn signal. ? l need to do some work that requires power only from the turn signal when they works left or right ? .. l was going to get it from taillights but as we know they are dual working with brakes lights same power line ... My custom project need to be works and powered only with turn signals left and right ...any idea ?
Melting Slicks
Joined: Dec 2018
Posts: 2,647
Likes: 1,381
From: Orange County, CA
I believe you could tap into the wires that come out of the steering column, at the same location where you would install a hyperflash relay harness. DIY example:
Full disclosure, I haven't probed these wires myself to know for sure.
