When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good morning all! I just was hoping if someone could guide me and give me some type of direction. I replaced all of the shocks and sway bar links in my Corvette. Rear were easy and just bolts. Problem in my head is the front top of the shock. I mounted them and i tightened the top nut until it stopped but it crushed the top of the rubber insulator. Is that something that should only be tightened until the rubber starts to compress or should i buy something else to go on the top? The old ones had cap on the bottom and the top of the shock mount. Any insight would be greatly appreciated.
Last edited by rycerocket600; Aug 31, 2025 at 09:45 AM.
Front shocks
