SpeedWORKS...Need Some Feedback!
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
SpeedWORKS...Need Some Feedback!
:D
http://www.txspeedworks.com/roll_bars.cfm
If you click on the 2 pics, located lower right, on the bottom and the one just above that, you'll see what I'm spying :D
Looks like the tonneau cover isn't touched and I know this will pass my track inspection and our resident whiner :jester
Looking for some feedback and input, and I'll also be in Dallas in April so watch out :D :cheers: TIA :cheers:
http://www.txspeedworks.com/roll_bars.cfm
If you click on the 2 pics, located lower right, on the bottom and the one just above that, you'll see what I'm spying :D
Looks like the tonneau cover isn't touched and I know this will pass my track inspection and our resident whiner :jester
Looking for some feedback and input, and I'll also be in Dallas in April so watch out :D :cheers: TIA :cheers:
Drifting
Joined: Nov 2000
Posts: 1,456
Likes: 1
From: Allen TX
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
my friend the one has the first one ever done, and the tonneau is touched. however, if all you are insterest in buying from speedworks is a roll bar then service is top notch. shot him an email and i am sure he would give you a tour of it.
[Modified by thefly, 8:32 PM 3/22/2003]
[Modified by thefly, 8:32 PM 3/22/2003]
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (thefly)
my friend the one has the first one ever done, and the tonneau is touched. however, if all you are insterest in buying from speedworks is a roll bar then service is top notch. shot him an email and i am sure he would give you a tour of it.
Le Mans Master
Joined: Mar 2002
Posts: 5,718
Likes: 2
From: Flower Mound TX
Cruise-In V Veteran
St. Jude Contributor
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
Mark: You better let us know when you get to Dallas...we got to get some people together!
Racer
Joined: Jan 2002
Posts: 272
Likes: 0
From: Southlake TX
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
meangreen Check out this link to their site
http://www.txspeedworks.com/image_ga...fm?imgsetID=40
It seems they do have to cut it
http://www.txspeedworks.com/image_ga...fm?imgsetID=40
It seems they do have to cut it
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (bigDvette)
thanks and I think I did find those pics and I think you're right :(
I'll call 'em on Monday and see what the scoop is but I may be SOL :(
I'll call 'em on Monday and see what the scoop is but I may be SOL :(
Race Director
Joined: Jun 1999
Posts: 10,753
Likes: 0
From: Dallas TX
Elite Member
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
Mark,
Talk to Dan, the owner. He's a great guy and knowledgeable.:)
972 395 9844
RG
Talk to Dan, the owner. He's a great guy and knowledgeable.:)
972 395 9844
RG
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (RG in Dallas)
Mark,
Talk to Dan, the owner. He's a great guy and knowledgeable.:)
972 395 9844
RG
Talk to Dan, the owner. He's a great guy and knowledgeable.:)
972 395 9844
RG
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Apr 2001
Posts: 26,794
Likes: 614
From: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
St. Jude Donor '06
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
I just had SPEEDWERKS put in this custom 6 pt bar in my car this winter and they did a KICK AZZ JOB! The bar is first rate custom piece and they do put on completly new hinges on the tonneau top and its operates completely different from stock but just have to get use to it as it is a close fit from clearing the hoop for removing the top and putting it back on (but just have to get use to it).
THEY DID AN AWESOME JOB and the bar IS FIRST CLASS! I don't have any pics but go see THE ONE's signature as he has great pics of his. I also had them install dual 5 pt racing simpson harnesses and those are awesome also.
BEST OF LUCK!
MTI 427 Roadster
THEY DID AN AWESOME JOB and the bar IS FIRST CLASS! I don't have any pics but go see THE ONE's signature as he has great pics of his. I also had them install dual 5 pt racing simpson harnesses and those are awesome also.
BEST OF LUCK!
MTI 427 Roadster
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (MTI 427 Roadster)
BEST OF LUCK!
MTI 427 Roadster
MTI 427 Roadster
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (MTI 427 Roadster)
I just had SPEEDWERKS put in this custom 6 pt bar in my car this winter and they did a KICK AZZ JOB!
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (Patman36)
can't decide between that or tan wrapped :D
and trust me, it's tough having an 11sec, safety following, car show winning C5 :D
and trust me, it's tough having an 11sec, safety following, car show winning C5 :D
Race Director
Joined: Jun 1999
Posts: 10,753
Likes: 0
From: Dallas TX
Elite Member
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
and trust me, it's tough having an 11sec, safety following, car show winning C5 :D
...with humility.;):):D
RG
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (RG in Dallas)
humility :D....screw humility :lolg:
with a best of 12.477@111.16 intake/exhaust A4 and winner of the CI3 Car Show....who needs humility :D :lolg: :jester
with a best of 12.477@111.16 intake/exhaust A4 and winner of the CI3 Car Show....who needs humility :D :lolg: :jester
Race Director
Joined: Jun 1999
Posts: 10,753
Likes: 0
From: Dallas TX
Elite Member
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Re: SpeedWORKS...Need Some Feedback! (Mean Green 2000)
humility :D....screw humility :lolg:
with a best of 12.477@111.16 intake/exhaust A4 and winner of the CI3 Car Show....who needs humility :D :lolg: :jester
with a best of 12.477@111.16 intake/exhaust A4 and winner of the CI3 Car Show....who needs humility :D :lolg: :jester
BTW, Keith up there at SW does the roll bars I think, you may want to talk to him too.
RG
Thread Starter
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: SpeedWORKS...Need Some Feedback! (RG in Dallas)
;) :D
I leave for Houston in the am, but I have a list of calls that I need to make as soon as I touch down :D
BTW, Keith up there at SW does the roll bars I think, you may want to talk to him too.
RG
RG
