headlight switch question
Thread Starter
Intermediate
Joined: Jul 2003
Posts: 25
Likes: 0
headlight question
Initially, I noticed that my fog lights button began to control my headlights. (When I pushed that button my lights would either go on or off.) Last Thursday I noticed that the button once again controlled the fog lights, but now the doors for my headlights will not come up (Lights would come on)…. Now the lights don’t come on and the doors still don’t open. When I manually put the doors up the high beams will work under the intermediate mode, but not the continuous mode. I know that the motor and headlights work because I unplugged the socket going to the headlight/motor and powered them straight from the battery. (They popped up just fine and the lights turned on.) I’ve read this could be the module, switch or batter cables not being tight. What do you guys think?
Thanks in advance,
Erik
:confused:
[Modified by TwoThirtyFive, 12:41 AM 8/18/2003]
Thanks in advance,
Erik
:confused:
[Modified by TwoThirtyFive, 12:41 AM 8/18/2003]
