Just installed Halltech TRAP...
Thread Starter
Racer
Joined: Mar 2003
Posts: 402
Likes: 0
From: California
Just installed Halltech TRAP...
I have an 03 ZO6 that previously had the zip tie mod and that's it. It dynoed 363rwhp/350rwtq. Not bad for a stock ZO6 with only the zip tie mod.
Today I received and installed my Halltech TRAP intake. SOTP there is a nice gain. A very nice gain. A big improvement over the zip tie mod. I was trapping 115mph with the zip tie and this Saturday I'll go to the track and see what I can trap with the new Halltech intake. I'll post my results Saturday night. Thanks Jim for the great customer service and fast delivery of the system. :cheers:
I won't get a chance to dyno the TRAP by itself but I am installing some LGM longtubes next week and will have it dyno tuned then.
Today I received and installed my Halltech TRAP intake. SOTP there is a nice gain. A very nice gain. A big improvement over the zip tie mod. I was trapping 115mph with the zip tie and this Saturday I'll go to the track and see what I can trap with the new Halltech intake. I'll post my results Saturday night. Thanks Jim for the great customer service and fast delivery of the system. :cheers:
I won't get a chance to dyno the TRAP by itself but I am installing some LGM longtubes next week and will have it dyno tuned then.
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
Z06 with stock exhaust and TRAP Stinger Package=450 HP
Glad you're happy with the SOTP results. We dynoed our 2002 Z06 today with the Halltech TRAP CF, Halltech PTB, TBCB, RC Injectors, Halltech Programming at 382.2 RWHP/367.9 RWT through the stock exhaust system. This car has 7,000 miles on the TRAP, from HB, CA to NY and back!
There is one more mod onboard, that took 2 hours to install and was worth 10 RWHP!
The complete Stinger Package Stage 1, has only bolt on mods under the hood, but utilizies the stock headers, cats, h-pipe, and titnium mufflers. 100% GM.
Have fun at the track!
Jim Hall
[Modified by Jim Hall, 4:08 PM 9/17/2003]
There is one more mod onboard, that took 2 hours to install and was worth 10 RWHP!
The complete Stinger Package Stage 1, has only bolt on mods under the hood, but utilizies the stock headers, cats, h-pipe, and titnium mufflers. 100% GM.
Have fun at the track!
Jim Hall
[Modified by Jim Hall, 4:08 PM 9/17/2003]
Le Mans Master
Joined: Nov 2000
Posts: 7,391
Likes: 3
From: Chandler AZ
Re: Just installed Halltech TRAP... (georges03zo6)
Here is an example of an untuned LS1... baseline (blue), headers/highflows/Stingers (red), and finally adding nothing more than the Halltech CF Trap with the Tunnel Port (green).
