Track results from sleeper cam
Thread Starter
Racer
Joined: Aug 2002
Posts: 475
Likes: 0
From: DFW TX
Track results from sleeper cam
60 ft 2.002
1/8 7.999
mph 92.89
1/4 12.179
mph 119.95
I ran this time Sat night at the vette shootout at Hallsville. The event was great and I had a damn good time. The car ran 118-119mph on all of my passes! I was pumped. All runs were on 18 inch supercar tires.
Cam is a 220/220 581/.581 114 LSA from Texas Speed (they won the event!)
NO headers, NO LS6 intake, STOCK cats, NO heads.
363rwhp :cheers: :cheers: :cheers:
1/8 7.999
mph 92.89
1/4 12.179
mph 119.95
I ran this time Sat night at the vette shootout at Hallsville. The event was great and I had a damn good time. The car ran 118-119mph on all of my passes! I was pumped. All runs were on 18 inch supercar tires.
Cam is a 220/220 581/.581 114 LSA from Texas Speed (they won the event!)
NO headers, NO LS6 intake, STOCK cats, NO heads.
363rwhp :cheers: :cheers: :cheers:
Racer
Joined: Jul 2003
Posts: 398
Likes: 0
From: Calera AL
Re: Track results from sleeper cam (FRC21)
Dang that's great!!! 60 odd horsepower gain from cam only? WOW! That's one potent camshaft.
You get some traction and the 11's are yours easy. 119MPH is very strong indeed.
You get some traction and the 11's are yours easy. 119MPH is very strong indeed.
Drifting
Joined: Jul 2003
Posts: 1,313
Likes: 0
From: Redwood City, CA
Re: Track results from sleeper cam (FRC21)
Awesome ET's,man! That is haulin' for so little mods!
Now tell me more about this cam and how much was parts/install. Did you install the cam only without other parts?Any tuning? I might consider this on my 98 A4 coupe.
Thanks and congrats!
-Don
[Modified by OutlawDon, 7:34 PM 9/28/2003]
Now tell me more about this cam and how much was parts/install. Did you install the cam only without other parts?Any tuning? I might consider this on my 98 A4 coupe.
Thanks and congrats!
-Don
[Modified by OutlawDon, 7:34 PM 9/28/2003]
Team Owner
Joined: Apr 2001
Posts: 26,794
Likes: 614
From: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
St. Jude Donor '06
Re: Track results from sleeper cam (FRC21)
AWESOME TIMES and ets and mph for just a cam an not the usual bolt ons, etc.
I take it your car is an M6? Keep up the great works and throw some headers on, 4.10s and your ALL SET!!!!!!!!!!!!! :eek: :eek: :eek: :smash: :smash: :smash:
I take it your car is an M6? Keep up the great works and throw some headers on, 4.10s and your ALL SET!!!!!!!!!!!!! :eek: :eek: :eek: :smash: :smash: :smash:
Team Owner
Joined: Apr 2001
Posts: 26,794
Likes: 614
From: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
St. Jude Donor '06
Re: Track results from sleeper cam (FRC21)
AWESOME TIMES and ets and mph for just a cam an not the usual bolt ons, etc.
I take it your car is an M6? Keep up the great works and throw some headers on, 4.10s and your ALL SET!!!!!!!!!!!!! :eek: :eek: :eek: :smash: :smash: :smash:
PS-Oh, now i see you a hardtop so i guess i just answered my question and my gut instinct was right on! :cheers:
I take it your car is an M6? Keep up the great works and throw some headers on, 4.10s and your ALL SET!!!!!!!!!!!!! :eek: :eek: :eek: :smash: :smash: :smash:
PS-Oh, now i see you a hardtop so i guess i just answered my question and my gut instinct was right on! :cheers:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Aug 2002
Posts: 475
Likes: 0
From: DFW TX
Re: Track results from sleeper cam (MTI 427 Roadster)
Yes the car is a MN6 hardtop. The cam with install and full LS1 edit dyno tune from Texas Speed was under $1600. The cam is great, you can barely notice it even has a cam. Shifts are at 6,800 rpm.
[Modified by FRC21, 9:45 PM 9/28/2003]
[Modified by FRC21, 9:45 PM 9/28/2003]
Le Mans Master
Joined: Jan 2003
Posts: 6,298
Likes: 0
From: Tyler TX
Re: Track results from sleeper cam (FRC21)
I noticed that your car was pulling hard on the big end. What gears are you running in it .
:cheers:
Yes the car is a MN6 hardtop. The cam with install and full LS1 edit dyno tune from Texas Speed was under $1600. The cam is great, you can barely notice it even has a cam. Shifts are at 6,800 rpm.
[Modified by FRC21, 9:45 PM 9/28/2003]
[Modified by FRC21, 9:45 PM 9/28/2003]
Thread Starter
Racer
Joined: Aug 2002
Posts: 475
Likes: 0
From: DFW TX
Re: Track results from sleeper cam (LittleBoyBlu99)
Stock 3:42's. It crosses the traps at the rev limiter in third. :eek: :eek: :thumbs: :cheers:
Race Director
Joined: Aug 1999
Posts: 15,466
Likes: 0
From: GARDENA Ca, State Of Konfusion
St. Jude Donor '05
Re: Track results from sleeper cam (OutlawDon)
Awesome ET's,man! That is haulin' for so little mods!
Now tell me more about this cam and how much was parts/install. Did you install the cam only without other parts?Any tuning? I might consider this on my 98 A4 coupe.
Thanks and congrats!
-Don
[Modified by OutlawDon, 7:34 PM 9/28/2003]
Now tell me more about this cam and how much was parts/install. Did you install the cam only without other parts?Any tuning? I might consider this on my 98 A4 coupe.
Thanks and congrats!
-Don
[Modified by OutlawDon, 7:34 PM 9/28/2003]
:yesnod:
