Tail light lense removable?
Thread Starter
Pro
Joined: Feb 2001
Posts: 518
Likes: 0
From: Bay Area CA
Re: Tail light lense removable? (FO SHIZZLE)
I'm trying to remove the lense from the body of the tail lamp. The two screws just hold the lamp to the car. I'm working on a LED project but the lense seems like it doesn't want to come off easily. I may have to take out the dremel and cut it off :skep:
Team Owner
Joined: Dec 2000
Posts: 58,783
Likes: 1
From: D*ck ina Box
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Tail light lense removable? (boost2much)
I'm trying to remove the lense from the body of the tail lamp. The two screws just hold the lamp to the car. I'm working on a LED project but the lense seems like it doesn't want to come off easily. I may have to take out the dremel and cut it off :skep:
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
Re: Tail light lense removable? (boost2much)
Does anyone know if the tail light lenses are removable? :confused:
:cheers:
:cheers:
I wish they weren't attached to the housing. I have considered putting some sort of graphic on the inside of the lens, etc. myself, but gave up when I saw how they're made.
Robert
Thread Starter
Pro
Joined: Feb 2001
Posts: 518
Likes: 0
From: Bay Area CA
Re: Tail light lense removable? (LoneStarFRC)
I think I will try one with a dremel and cutting disk. I was thinking of some kind of superglue and maybe some silicon to stop any water leakage.
Team Owner
Joined: May 2001
Posts: 36,836
Likes: 244
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
Re: Tail light lense removable? (boost2much)
I think I will try one with a dremel and cutting disk. I was thinking of some kind of superglue and maybe some silicon to stop any water leakage.
Good luck,
Robert :)
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Re: Tail light lense removable? (LoneStarFRC)
Hot melt glue is not recommended! The summer heat will get it hot enough that it may seperate or start to leak. I would recommend a good two part plastic epoxy. Wal-mart sells a great plastic epoxy that melts the two surfaces and bonds them together. It smells bad when its bonding but once it sets up, it WILL NOT come back apart. I bought some "super glue" like stuff at Carslie this summer. It is INDUSTRIAL stuff that makes "super glue" look like elmers glue :D The stuff is fantastic!
It works VERY WELL! :thumbs:
If your interested in it please e-mail me and I will give you the info on where you can get it. bill327@msn.com
For cutting the lenses with a dremmel, use the thin ceramic disc at a medium to high speed! Cut slow and evenly! If you cut too fast it will melt the plastic rather than cut it and the disc will clog, bind and break. Hold the lense in some sort of a fixture so that it will not move while you cut.
Should work great. I cut through 1/4" plexyglass and it worked fine. The secret is to keep the plastic tailings in a dust form and not letting them got so hot as to melt together and bind the cutting disc. :thumbs:
It works VERY WELL! :thumbs:
If your interested in it please e-mail me and I will give you the info on where you can get it. bill327@msn.com
For cutting the lenses with a dremmel, use the thin ceramic disc at a medium to high speed! Cut slow and evenly! If you cut too fast it will melt the plastic rather than cut it and the disc will clog, bind and break. Hold the lense in some sort of a fixture so that it will not move while you cut.
Should work great. I cut through 1/4" plexyglass and it worked fine. The secret is to keep the plastic tailings in a dust form and not letting them got so hot as to melt together and bind the cutting disc. :thumbs:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Thread Starter
Pro
Joined: Feb 2001
Posts: 518
Likes: 0
From: Bay Area CA
Re: Tail light lense removable? (Bill Curlee)
:cool: Thanks for the all the feedback. Will keep the dremel at med. speed. Bill, sent you a email :thumbs:
[Modified by boost2much, 12:15 PM 10/23/2003]
[Modified by boost2much, 12:15 PM 10/23/2003]
Administrator
Joined: Mar 2001
Posts: 368,611
Likes: 24,865
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Re: Tail light lense removable? (boost2much)
Its all one piece, so you will probably have to dremmel it off.
