blackwing install link
Race Director
Joined: Jul 2001
Posts: 13,190
Likes: 3
From: Johns Creek GA
Re: blackwing install link (Vette Virgin)
I am sure there are a few How-To links, but I have had this one booked marked for a while...
http://www.c5forum.com/diy/donaldson.php
http://www.c5forum.com/diy/donaldson.php
Administrator
Joined: Mar 2001
Posts: 368,297
Likes: 24,776
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Re: blackwing install link (Vette Virgin)
If you are looking for the link, check the tech tips on this forum. I believe there is a write-up in there.
Drifting
Joined: Sep 2002
Posts: 1,529
Likes: 53
From: Houston, TX
Re: blackwing install link (Vette Virgin)
Actually, you can contact Donaldson, and they will email the instructions to you. The install is easier without the instructions. I also believe SLP has instructions on their website for the Blackwing. The hardest part is pulling the connector from the MAF.
If you need instructions, IM me and I have a few different ones I can email you. I actually had 6 different ones when I installed mine, but determined the were more complicated than just doing it.
Make sure all of the air ducts are on tight and without any gaps or you will get a rough idle and possible some codes.
If you need instructions, IM me and I have a few different ones I can email you. I actually had 6 different ones when I installed mine, but determined the were more complicated than just doing it.
Make sure all of the air ducts are on tight and without any gaps or you will get a rough idle and possible some codes.
