Memory Package upgrade?
Thread Starter
Racer
Joined: Oct 2001
Posts: 385
Likes: 3
From: Lincoln CA
Memory Package upgrade?
Can you (has anyone) installed the memory package into a car that didn't come with Memory from the factory?
I didn't think I needed it, but think it would come in handy now.
I would think I could just buy the switch panel and have a GM tech program the BCM or PCM or whatever to function with it.
And possibly have to buy two new transmitters.
Thank you for any and all help.
I didn't think I needed it, but think it would come in handy now.
I would think I could just buy the switch panel and have a GM tech program the BCM or PCM or whatever to function with it.
And possibly have to buy two new transmitters.
Thank you for any and all help.
Burning Brakes
Joined: Nov 2003
Posts: 785
Likes: 0
From: Hutschenhausen
Re: Memory Package upgrade? (ZO SIC)
I saw it in Ecker's but if I were you, I wouldn't do it. My memory is all wacked out - the seats move to some strange position now no matter how hard I try to program the 3 settings. I've heard others with similar problems.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Re: Memory Package upgrade? (SmashF15C)
Smash
Try this!! Move your seat to its full back position and press the Program buttons to memorize this position for all three settings. Then pull your key and see if it stays there!
If it does, re-program the settings to your normal driving settings and then see if it goes back to the regular entry setting. (all the way back)
If it is still messed up, I would set it to the full back position and disconnect the battery for a few minutes. That will reset EVERYTHING!
Bill C
[Modified by Bill Curlee, 8:07 PM 11/27/2003]
Try this!! Move your seat to its full back position and press the Program buttons to memorize this position for all three settings. Then pull your key and see if it stays there!
If it does, re-program the settings to your normal driving settings and then see if it goes back to the regular entry setting. (all the way back)
If it is still messed up, I would set it to the full back position and disconnect the battery for a few minutes. That will reset EVERYTHING!
Bill C
[Modified by Bill Curlee, 8:07 PM 11/27/2003]
Melting Slicks
Joined: Nov 1999
Posts: 2,352
Likes: 864
From: MI
Cruise-In VI Veteran
Re: Memory Package upgrade? (Bill Curlee)
:iagree:
And.....make sure you door is closed before you put the key in the ignition.
Many times I catch myself closing the door, after I stuck the key in the ignition.
Hope this helps.
And.....make sure you door is closed before you put the key in the ignition.
Many times I catch myself closing the door, after I stuck the key in the ignition.
Hope this helps.
