manifold
Thread Starter
Instructor
Joined: Jan 2003
Posts: 241
Likes: 0
From: south boston va
manifold exhaust
zo6 manifold or ls1 manifold which has most hp. i'm on a budget tryin to upgrade my 00 a4 :). my first pass 13.10 @ 105 mph still stock addin programmer this week. so any advise will help. [ no nos, no t/q, no gears ] will be added thanks
[Modified by 1320dance, 2:37 AM 3/7/2004]
[Modified by 1320dance, 2:37 AM 3/7/2004]
Race Director
Joined: May 2000
Posts: 14,542
Likes: 5
Re: manifold exhaust (1320dance)
If you are on a budget, don't waste your money on a programmer or ls6 manifold. You will make the most bolt-on horsepower with an aftermarket intake, like a Blackwing, and (this is controversial, but I picked up 12 dyno proven rwhp on my '00, by removing the MAF screen -- a free mod).
That should pick up 20-25 rwhp.
Exhaust mod is OK for sound, but will not net a lot more hp.
That should pick up 20-25 rwhp.
Exhaust mod is OK for sound, but will not net a lot more hp.
Melting Slicks
Joined: Mar 2000
Posts: 2,975
Likes: 1
From: Northwest Iowa
Re: manifold exhaust (EHS)
You will make the most bolt-on horsepower with an aftermarket intake, like a Blackwing,
and (this is controversial, but I picked up 12 dyno proven rwhp on my '00, by removing the MAF screen -- a free mod).
I doubt that I got 1-2 hp gain when I removed mine. Yours must have really been plugged up.
Exhaust mod is OK for sound, but will not net a lot more hp.
Race Director
Joined: May 2000
Posts: 14,542
Likes: 5
Re: manifold exhaust (HawkIVette)
HawIVEtte:
Too tired to quote your entire post, but I disagree with your disagreement, and I suspect so does C4C5specialist, who did all the modifications and testing on my car. No, my MAF was not "really plugged up." We don't get a lot of hayseeds or other debris in this part of the country.
All the modifications are backed up with numerous, repeated, controlled conditions, back-to-back dyno runs and road tests. Enough to accurately verify the gains and losses. Notice I also carefully posted that mine was an '00. Your '99 is different.
1320dance posted he is on a budget. Air filter is a budget mod ($189 currently on the forum). MAF screen removal is a budget mod ($free). Headers, high flow cats, X-pipe, cat back system is not a budget mod (at least $3,500 installed professionally).
Too tired to quote your entire post, but I disagree with your disagreement, and I suspect so does C4C5specialist, who did all the modifications and testing on my car. No, my MAF was not "really plugged up." We don't get a lot of hayseeds or other debris in this part of the country.
All the modifications are backed up with numerous, repeated, controlled conditions, back-to-back dyno runs and road tests. Enough to accurately verify the gains and losses. Notice I also carefully posted that mine was an '00. Your '99 is different.
1320dance posted he is on a budget. Air filter is a budget mod ($189 currently on the forum). MAF screen removal is a budget mod ($free). Headers, high flow cats, X-pipe, cat back system is not a budget mod (at least $3,500 installed professionally).
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
