Hardwiring the V1
Mar 12, 2004 | 06:13 PM
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 760
Likes: 27
From: Farmersville Texas
Hardwiring the V1
I'm wanting to hardwire in my Valentine 1. Who has done this themselves, and is it difficult?
Mar 12, 2004 | 06:19 PM
Race Director
Joined: May 2003
Posts: 19,105
Likes: 2
From: Paducah KY
Cruise-In VII Veteran
Re: Hardwiring the V1 (Brannon)
I wired mine using these instructions from the Tech Tips section of forum.
Very easy install. :yesnod:
https://www.corvetteforum.com/techti...=165&TopicID=1
[Modified by Z06-JIM, 5:20 PM 3/12/2004]
Mar 12, 2004 | 06:27 PM
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 760
Likes: 27
From: Farmersville Texas
Re: Hardwiring the V1 (Brannon)
Thanks for the link. I'll give it a shot. :thumbs:
[Modified by Brannon, 11:42 PM 3/12/2004]
Mar 12, 2004 | 06:38 PM
Safety Car
Joined: Nov 2002
Posts: 4,025
Likes: 2
From: Valdosta GA
Re: Hardwiring the V1 (Z06-JIM)
:iagree: Had mine in for over a year. Very easy installation and has worked like a charm. Saved me on many occassions of spirited driving.