Stainless Works Headers
Thread Starter
Intermediate
Joined: Apr 2003
Posts: 25
Likes: 0
From: Morgantown WV
Stainless Works Headers
I'm seriously considering getting a set of Stainless Works Headers installed on my 01 Coup. These headers don't get much attention on this forum. Anyone using them? Comments? I'm told they are extremely well constructed.
Thanks for the feedback ;)
Thanks for the feedback ;)
Safety Car
Joined: Sep 2003
Posts: 3,558
Likes: 2
From: Cape Coral FL
Re: Stainless Works Headers (JayMullen)
I am using them and I like them a lot. They are constucted very well, were easy to install, and have never thrown a code. With an LS6 manifold and no tune I picked up 31rwhp and 34rwtq with the setup I have. They also come with a limited lifetime guarantee. :)
Drifting
Joined: Aug 2002
Posts: 1,538
Likes: 290
From: Central MO
Re: Stainless Works Headers (ArKay99)
I am using them and I like them a lot. They are constucted very well, were easy to install, and have never thrown a code. With an LS6 manifold and no tune I picked up 31rwhp and 34rwtq with the setup I have. They also come with a limited lifetime guarantee. :)
Love mine and never a code!
Instructor
Joined: Aug 2002
Posts: 130
Likes: 1
From: Hollywood FL
Re: Stainless Works Headers (JayMullen)
I have the Stainless Works exhaust package including headers, 3" Random Tech Cats and X-pipe and have been extremely satisfied with the fit, finish, and performance. The car has the aggressive sound I wanted, but cruises the highway with minimal resonance, even with the Stingers. :hurray:
I would highly recommend this system :cheers:
I would highly recommend this system :cheers:
Safety Car
Joined: Oct 2002
Posts: 4,434
Likes: 1
From: Austin TX
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
St. Jude Donor '03-'04-'05
Re: Stainless Works Headers (ettoredjr)
I, too, have the Stainless Works headers and intermediate pipes and X pipe with Random cats. It picked up some good power and sound. I have Corsa Indys for the mufflers.
I like my SW setup. They haven't given me any problems. IMHO, the only better exhaust system is LGM's long tube headers & intermediate pipes.
I like my SW setup. They haven't given me any problems. IMHO, the only better exhaust system is LGM's long tube headers & intermediate pipes.
Le Mans Master
Joined: Sep 2001
Posts: 5,857
Likes: 84
From: Gainesville VA
Re: Stainless Works Headers (LittleBoyBlu99)
Hope your set come with the o2's tap'd on both sides......... be sure to check that before you have them on the car....... :rolleyes:
Other than that....... yep there headers, I have never seen a header not perform on a LS1 or LS6 as far as long tubes go. Stainless is the way to go as far as material.
I think I was PC on this post........ ;)
[Modified by Ryan2002C5, 8:09 PM 3/24/2004]
Other than that....... yep there headers, I have never seen a header not perform on a LS1 or LS6 as far as long tubes go. Stainless is the way to go as far as material.
I think I was PC on this post........ ;)
[Modified by Ryan2002C5, 8:09 PM 3/24/2004]
Instructor
Joined: Aug 2002
Posts: 130
Likes: 1
From: Hollywood FL
Re: Stainless Works Headers (LittleBoyBlu99)
Are these Headers 1 3/4" or 1 78" :confused: they look nice! :seeya
:cool:
[Modified by ettoredjr, 8:57 PM 3/24/2004]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Jun 2002
Posts: 726
Likes: 45
From: Marquette MI
Re: Stainless Works Headers (JayMullen)
I have Stainless Works headers on my 02 vert and really like them. With a Blackwing and a dyno tune the car puts out 330 rwhp. and the sound with Corsa Indys is awesome. The headers are so beautiful it's a shame to hide them in the engine compartment. Stainless Works used to have a higher profile on the Forum - maybe they have enough business?
Drifting
Joined: Feb 2003
Posts: 1,276
Likes: 0
From: East Coast
Re: Stainless Works Headers (JayMullen)
I just got the full 3-inch system for my car to go with my new Kooks 1-7/8 headers , they made me a custom system with special ultra hi-flo mufflers that I'll be testing out , I dealt with Al Noe directly , he's a great guy to work with , very helpful ,and I look forward to working with him in the future .
Le Mans Master
Joined: Apr 1999
Posts: 7,820
Likes: 0
From: Burlington ON
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: Stainless Works Headers (Red Gump)
I have the complete Stainless Works setup on my car, right from the headers to the tailpipes. I have their long tube headers, 3" stainless center X section, and 3" high flow muffler system. I am very happy with the fit, performance and sound of this system. The 3" diameter gives a nice deep rumble to the car. Also, the lifetime warranty with all SW products is a bonus.
If anyone is interested in more information or pricing on Stainless Works products, please drop me an email!
[Modified by MattG, 9:17 AM 3/25/2004]
If anyone is interested in more information or pricing on Stainless Works products, please drop me an email!
[Modified by MattG, 9:17 AM 3/25/2004]
Drifting
Joined: May 2003
Posts: 1,715
Likes: 1
From: cAshburn VA
Re: Stainless Works Headers (MattG)
I have the complete Stainless Works setup on my car, right from the headers to the tailpipes. I have their long tube headers, 3" stainless center X section, and 3" high flow muffler system. I am very happy with the fit, performance and sound of this system. The 3" diameter gives a nice deep rumble to the car. Also, the lifetime warranty with all SW products is a bonus.
If anyone is interested in more information or pricing on Stainless Works products, please drop me an email!
[Modified by MattG, 9:17 AM 3/25/2004]
If anyone is interested in more information or pricing on Stainless Works products, please drop me an email!
[Modified by MattG, 9:17 AM 3/25/2004]
Drifting
Joined: Feb 2003
Posts: 1,276
Likes: 0
From: East Coast
Re: Stainless Works Headers (IFLUBYU)
Nice setup, wouldn't mind hearing a soundfile, or see a 1/4 mile vid on that puppy!
[Modified by TEK WARRIOR, 12:38 AM 4/2/2004]
Race Director
Joined: Nov 2001
Posts: 18,016
Likes: 0
From: sebring florida
Re: Stainless Works Headers (IFLUBYU)
Nice setup, wouldn't mind hearing a soundfile, or see a 1/4 mile vid on that puppy!
http://www.xquizitrecords.com/SRT/Ro...%20RedGump.wmv