When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
then look no further... just after having 3:42's installed I took my C5 over to see Nick Newton in Hayward California to have the necessary/required work performed on my computer. In the short time it took to explain the irregularities my C5 was having, Nick took the time to explain just exactly what was needed to be performed to correct. I became very impressed by his professionalism as well as his experience in dealing with the LS1. You not only will get your LS1 expertly tuned but have it dyno as well. I highly suggest you call him at (510) 427-1394 and let him convince you as he did me just what he has to offer. :thumbs: :party: :cool:
Thanks guys, I have been wanting to get on this board to say hi, my shop is almost finished. I have been a watching this group for a while now, I know they/you had a bad experience with a previous tuner, which has been banned from this board, so I am taking somewhat of a slow approach, hopefully I can impress the right people, so I can gain some trust on this board, here is an early pic of my shop and my soon to be 9 second 6 speed camaro.....
Welcome to the forum. Alot of us bayarea folks need a good tuner/LS1 guy in our area. All the good ones are east coast, Texas, or down south. When you get your shop ready, send out a message on the board. You will have alot of interest. Maybe offer a special tuning deal for new customers. :hurray:
sorry for the misunderstaing, I am always ready for business, you got an email.
to the others that read this my dyno is not fully functional yet, I am building a custom lift that will cater to lowered cars and no door dings whatsoever, it isn't easy but it will be available shortly!
in the mean time I can go to any dyno to tune your car, I am well known at most of them as I have been tuning LS1s for few years.
to the others that read this my dyno is not fully functional yet, I am building a custom lift that will cater to lowered cars and no door dings whatsoever, it isn't easy but it will be available shortly!
in the mean time I can go to any dyno to tune your car, I am well known at most of them as I have been tuning LS1s for few years.
thanks guys.
Hey Nick,
I'll see ya tomorrow when we drop off my friends Z28.
Hey, get working on that Dyno, I want to lay down some baselines before we get busy on my car. :p:
Once you get up and running, maybe we should consider doing a CF Dyno Day at your shop? It would give the members a very good chance to see your place, meet you and learn about what you do there. I would be happy to set it up for you when you are ready. :yesnod: