Baseline Dyno & Stainless Works Headers

Reply Subscribe

Thread Tools

Search this Thread

Apr 3, 2004 | 01:51 PM

JayMullen

Thread Starter

Intermediate

Joined: Apr 2003

Posts: 25

Likes: 0

From: Morgantown WV

Baseline Dyno & Stainless Works Headers

Well, I just got back from Strope's Speed Shop in Washington PA. My baseline Dyno is 317.8 HP and 336.4 TQ on a stock 01 six speed Coup with a Blackwing. Basically, I'm pretty happy with those numbers and the fact that they will only get better. I ordered Stainless Works 1 3/4 headers, Random Cats and X Pipe and Strope's will do the install when they come in. Bill had a set of SW headers he had ordered for another customer and I went over them visually. All I can say is that they look like jewlery! First class workmanship, welds look very professional. I can see why SW offer a lifetime guarantee. I'll post my numbers as soon as the system is on the car. If they run like they look I expect to be a very happy camper :D

Apr 3, 2004 | 02:06 PM

skip89

Melting Slicks

Joined: Mar 2001

Posts: 2,233

Likes: 5

Re: Baseline Dyno & Stainless Works Headers (JayMullen)

Very interested in the results, if you can post pictures of the whole setup that would be great..

Apr 3, 2004 | 02:21 PM

JayMullen

Thread Starter

Intermediate

Joined: Apr 2003

Posts: 25

Likes: 0

From: Morgantown WV

Re: Baseline Dyno & Stainless Works Headers (skip89)

Somebody tell me how to post pictures :confused:

Apr 3, 2004 | 02:35 PM

ArKay99

Safety Car

Joined: Sep 2003

Posts: 3,558

Likes: 2

From: Cape Coral FL

Re: Baseline Dyno & Stainless Works Headers (JayMullen)

Quote:

Somebody tell me how to post pictures :confused:

First of all, :cheers: , on the headers. Posting pictures: You need to go to an internet provider that can post them. Then you upload them, provided you have them in digital form, to the provider, and they will have a url for the pictures. Copy that url into the post here on the forum and the pictures will come up. :)

Apr 3, 2004 | 02:36 PM

vettenuts

Team Owner

Joined: Mar 1999

Posts: 22,025

Likes: 192

From: At the beach in little Rhody

Re: Baseline Dyno & Stainless Works Headers (skip89)

Quote:

Very interested in the results, if you can post pictures of the whole setup that would be great..

:iagree:

I am looking forward to the results as well.

To post a picture, you need a host site you can link to. Does your internet provider allow you to have a web site, if so then you can load the pictures up to there and then link to them from here.

Apr 3, 2004 | 06:23 PM

GTC

Safety Car

Joined: Oct 2002

Posts: 4,434

Likes: 1

From: Austin TX

Cruise-In IV Veteran

Cruise-In V Veteran

Cruise-In VI Veteran

St. Jude Donor '03-'04-'05

Re: Baseline Dyno & Stainless Works Headers (JayMullen)

Watch out ... once you start modding, it becomes a disease, and you will always want a little bit more.

So, are you going to get new mufflers to go with your new Stainless Works headers & intermediate pipes? The SW system is very nice. I have it on my black vette, and I'm very happy with it.
:cheers:

Apr 3, 2004 | 08:32 PM

JayMullen

Thread Starter

Intermediate

Joined: Apr 2003

Posts: 25

Likes: 0

From: Morgantown WV

Re: Baseline Dyno & Stainless Works Headers (GTC)

Actually I think I'm going to stay with the stock cat back. At least until I see how loud the interior exhaust sound is. If it's not too loud, I might go for the quad oval stingers ;)

Apr 5, 2004 | 08:48 AM

Sorny

Pro

Joined: Feb 2004

Posts: 507

Likes: 0

From: Owatonna MN

Re: Baseline Dyno & Stainless Works Headers (JayMullen)

Lets see some #'s!

I've got SW headers, Hi-flows and X-pipe along with my GHL Magnums and Blackwing. I'd like to see your numbers and how they compare to mine. Sadly, I did not get a baseline dyno, so I'm left guessing the gains.

Sorny