Trans cooler install Instructions
Thread Starter
Safety Car
Joined: Nov 2003
Posts: 4,550
Likes: 3
From: Houston Texas
Trans cooler install Instructions
Did a search and nothing came up, can someone help me with instructions on installing a trans cooler and any suggestions on size brand etc.
krl
krl
Drifting
Joined: Sep 2002
Posts: 1,947
Likes: 0
From: Howell MI.
Re: Trans cooler install Instructions (krl)
I just posted Yesterday how my install went
http://forums.corvetteforum.com/zerothread?id=793915
Good Luck John
http://forums.corvetteforum.com/zerothread?id=793915
Good Luck John
Melting Slicks
Joined: Dec 2001
Posts: 2,040
Likes: 0
From: Collin County Texas
Re: Trans cooler install Instructions (krl)
Search the Archives tab.
Sent you a few pics of my install and noticed someone else just posted info also. It is an easy install and a must if you want to cool your tranny better than stock and especially when you start to stress the stock tranny.
Sent you a few pics of my install and noticed someone else just posted info also. It is an easy install and a must if you want to cool your tranny better than stock and especially when you start to stress the stock tranny.
Racer
Joined: Nov 2001
Posts: 353
Likes: 0
From: Jonesboro AR
Re: Trans cooler install Instructions (krl)
I used a B&M also, for over a year. Just put in a Dewitt Radiator and had to pull the tranny cooler as part of the radiator install and found that a lot of debris was caught between the tranny cooler & the AC evaporator. I would estimate 90% blocked. If I reinstall it, I will figure out a different mounting method so as to get a wider gap between the cooler & the evaporator to prevent this from happening again. The increased temps I was seeing may have been from this blockage. Just a little FYI to consider. The actual install of the cooler is not bad as blktie8 above indicated. Good luck. :cheers:
[Modified by newberd, 6:24 PM 4/11/2004]
[Modified by newberd, 6:24 PM 4/11/2004]
