MT ET Street Radials
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
MT ET Street Radials
Is anyone using the 17" MT ET Street Radials? How is the traction? What width rim? How is the handling with the stock tire in front?
[Modified by gojo, 11:38 AM 5/11/2004]
[Modified by gojo, 11:38 AM 5/11/2004]
Melting Slicks
Joined: Jan 2000
Posts: 3,029
Likes: 1
From: Wichita KS
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Re: MT ET Street Radials (gojo)
I think only the 15" are out, but from the tests I saw in Hotrod magazine they look good.
Melting Slicks
Joined: Aug 2002
Posts: 3,333
Likes: 1
From: Central NJ/PA
Re: MT ET Street Radials (gojo)
I have the 17x26 tires on my car(no tubes). The rims are 17x9.5 I bought from house of wheels on the forum. I love the set up! I have 18x10s on the front and it races& rides fine w/12 or more lbs of air pressure in the rear. I tried running 10lbs once and it was a light squirrly, but it was also cold out and I could have done a better burn out so it could have been better. My best 60' was 1.71 but the front of my car was almsot 2" lower than the back and all I did was spin. Now that the car is level I can feel a large difference on the street, cant wait to get it to the track and dump it.
