Cartek Gear Special
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 855
Likes: 11
Originally Posted by MTI 427 Roadster
DAVID:
If i send you my Getrag 3.73 gears (ring and pinion 100% perfect) in its housing unit that is cracked all the way through, how much would it cost me to send me a fully installed 3.73 or 3.90 complete diff. unit all set up (and ready to be bolted into my car) including shipping to Chicago. What would be the price without a hardened output shaft less the credit for my getrag 3.73 ring and pinion that i would send you in its cracked getrag built 3.73 diff. housing unit/rear carrier? Pleae note that the ring and pinon 3.73s i would be sending you are 100% perfect as the rear diff. unit did not implode/hand grenade, but simply was leaking when i yanked it and saw that it had a crack all the way through. Car was running fine when i yanked the carrier out of the car, etc. and the 3.73s should be 100% reusable. If it would be cheaper, how much to simply reinstall my 3.73 gears into a new housing unit that you would supply and i would ship the complete cracked getrag 3,73 unti with gears installed inside, etc.
Thanks bro and please send me a PM or email as i am ready to get my 3.73s fixed up asap!
Jim P. aka MTI 427 Roadster
If i send you my Getrag 3.73 gears (ring and pinion 100% perfect) in its housing unit that is cracked all the way through, how much would it cost me to send me a fully installed 3.73 or 3.90 complete diff. unit all set up (and ready to be bolted into my car) including shipping to Chicago. What would be the price without a hardened output shaft less the credit for my getrag 3.73 ring and pinion that i would send you in its cracked getrag built 3.73 diff. housing unit/rear carrier? Pleae note that the ring and pinon 3.73s i would be sending you are 100% perfect as the rear diff. unit did not implode/hand grenade, but simply was leaking when i yanked it and saw that it had a crack all the way through. Car was running fine when i yanked the carrier out of the car, etc. and the 3.73s should be 100% reusable. If it would be cheaper, how much to simply reinstall my 3.73 gears into a new housing unit that you would supply and i would ship the complete cracked getrag 3,73 unti with gears installed inside, etc.
Thanks bro and please send me a PM or email as i am ready to get my 3.73s fixed up asap!
Jim P. aka MTI 427 Roadster
Safety Car
Joined: Apr 2004
Posts: 4,097
Likes: 10
From: East Coast
Originally Posted by robz
I'll take a se of 4.56's also!
Mike, good to hear from you. Now you have Paul and John C. to contend with also. Gonna be a fun fall.
Mike, good to hear from you. Now you have Paul and John C. to contend with also. Gonna be a fun fall.
Melting Slicks
Joined: Jun 2004
Posts: 2,328
Likes: 0
From: Central TX
I was planning on doing this mod later in the year. But this is too good of a deal to pass. If I buy them now, I will have to install them now. So what mods would that leave me for in the winter, hmmm.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Le Mans Master
Joined: Nov 2003
Posts: 8,003
Likes: 248
From: Tampa Fl
St. Jude Donor '12-'13-'14
just to keep things in perspective, last week I got a call from Corvettes of Westchester, in NY. He called me to tell me about a great deal he was running. For $2500 dollars, he would change my MN6 rear gears and tune the car. $2000 just for the gears. I guess he's not a forum member and doesnt know a good price for a gear change!!!!
needless to say, I told him Id call him
needless to say, I told him Id call him
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 855
Likes: 11
Originally Posted by phils C5 vette
just to keep things in perspective, last week I got a call from Corvettes of Westchester, in NY. He called me to tell me about a great deal he was running. For $2500 dollars, he would change my MN6 rear gears and tune the car. $2000 just for the gears. I guess he's not a forum member and doesnt know a good price for a gear change!!!!
needless to say, I told him Id call him
needless to say, I told him Id call him
Team Owner
Joined: Nov 1999
Posts: 32,782
Likes: 11
From: Former NCM Drag Racing coordinator, National director Corvette Challenge Spring Hill, Tennessee: Whiting, New Jersey
Cruise-In VI Veteran
Cruise-In VII Veteran
Dave, will the price be the same for a C6????
"AlohaC5" Senior Member
Joined: Jun 2003
Posts: 3,562
Likes: 44
From: Madison, AL
Dave,
Good talking to you on the phone this afternoon. I'm looking forward to my appointment on 13 & 14 September to have the 3.90 gears and HD output shaft installed, along with my LUK Stage 2 Clutch Package, 30# SVO Injectors and Dyno-tune!
See ya then! Mike
Good talking to you on the phone this afternoon. I'm looking forward to my appointment on 13 & 14 September to have the 3.90 gears and HD output shaft installed, along with my LUK Stage 2 Clutch Package, 30# SVO Injectors and Dyno-tune!
See ya then! Mike
Originally Posted by Dave_Busch
We have just received our long awaited 3.90 and 4.10 C5 gears.
We will offer all C5, 3.42, 3.73, 3.90, and 4.10 gears installed in the car for $1095. This special is for 3 series carriers (3.15 or 3.42 differentials). It includes labor to remove and reinstall in your car. Labor to disassemble, clean, inspect, bearings, seals, your choice of gears, and labor to assemble. We also can upgrade your driver side output shaft for an additional $350. This special will be valid until September 15Th.
Call us at the shop to place an order at 908-317-4496 Monday thru Friday 10AM to 6PM E.S.T. , or contact me at davebusch@cartek.net. Installs are available Monday thru Saturdays.
We will offer all C5, 3.42, 3.73, 3.90, and 4.10 gears installed in the car for $1095. This special is for 3 series carriers (3.15 or 3.42 differentials). It includes labor to remove and reinstall in your car. Labor to disassemble, clean, inspect, bearings, seals, your choice of gears, and labor to assemble. We also can upgrade your driver side output shaft for an additional $350. This special will be valid until September 15Th.
Call us at the shop to place an order at 908-317-4496 Monday thru Friday 10AM to 6PM E.S.T. , or contact me at davebusch@cartek.net. Installs are available Monday thru Saturdays.
Thread Starter
Burning Brakes
Joined: Jul 2004
Posts: 855
Likes: 11
Originally Posted by AlohaC5
Dave,
Good talking to you on the phone this afternoon. I'm looking forward to my appointment on 13 & 14 September to have the 3.90 gears and HD output shaft installed, along with my LUK Stage 2 Clutch Package, 30# SVO Injectors and Dyno-tune!
See ya then! Mike
Good talking to you on the phone this afternoon. I'm looking forward to my appointment on 13 & 14 September to have the 3.90 gears and HD output shaft installed, along with my LUK Stage 2 Clutch Package, 30# SVO Injectors and Dyno-tune!
See ya then! Mike
I look forward to meeting you in person.