None on my 04 Coupe
Halltech Stinger Intake Lean codes
Thread Starter
Melting Slicks
Joined: Jan 2004
Posts: 2,746
Likes: 2
From: St. james NY
Halltech Stinger Intake Lean codes
Hey guys.
Found out that they have the special pricing until this weekend. I am going to order tom. Will I have LEAN CODES? 2003 zo6.
Id like to throw the intake on and drive around for a few weeks before I tune her. I might to a cam so I am going to wait on the tune a few weeks. Let me know. Thanks
-Zee
Found out that they have the special pricing until this weekend. I am going to order tom. Will I have LEAN CODES? 2003 zo6.
Id like to throw the intake on and drive around for a few weeks before I tune her. I might to a cam so I am going to wait on the tune a few weeks. Let me know. Thanks
-Zee
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
Originally Posted by CraZee ZO6
Hey guys.
Found out that they have the special pricing until this weekend. I am going to order tom. Will I have LEAN CODES? 2003 zo6.
Id like to throw the intake on and drive around for a few weeks before I tune her. I might to a cam so I am going to wait on the tune a few weeks. Let me know. Thanks
-Zee
Found out that they have the special pricing until this weekend. I am going to order tom. Will I have LEAN CODES? 2003 zo6.
Id like to throw the intake on and drive around for a few weeks before I tune her. I might to a cam so I am going to wait on the tune a few weeks. Let me know. Thanks
-Zee
Burning Brakes
Joined: Oct 2000
Posts: 876
Likes: 23
From: Prescott Valley, AZ
Only cars with screenless MAFs. That's '02 thru '04 Z06s seem to have the issue. My '04 throws the codes. Jim Hall told me GM has had a lot of issues with the screenless MAF and have gone back to a screened MAF on the C6. Guess it remains to be seen if the screen stays on the new Z.
I cut a hole in the shroud and fashioned a makeshift air scoop from a clothes dryer exhaust vent. The warhead filter sits on top of it so cold air can enter through the bottom of the filter. My hope is to smooth out the air going through the filter giving the pcm more accurate readings from the MAF. So far no codes even though the weather has cooled down recently where I live. Not nearly enough miles on this setup yet to draw any conclusions. If I continue to be code free, I will let everyone know.
mark
I cut a hole in the shroud and fashioned a makeshift air scoop from a clothes dryer exhaust vent. The warhead filter sits on top of it so cold air can enter through the bottom of the filter. My hope is to smooth out the air going through the filter giving the pcm more accurate readings from the MAF. So far no codes even though the weather has cooled down recently where I live. Not nearly enough miles on this setup yet to draw any conclusions. If I continue to be code free, I will let everyone know.
mark
Last edited by mmorse; Aug 5, 2004 at 06:53 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski