Help With Install
Thread Starter
Race Director
Joined: Feb 2004
Posts: 11,651
Likes: 9
From: HOW FAST WAS I GOING OFFICER? Los Angeles Hating GM Dealership Service Dept.'s Since Sept. 2004
St. Jude Donor '04-'05-'06-'07
Help With Install
Okay! So I feel like it's X-Mas and I got my new (used) Design Specialties Fuel Rail, Manifold, and Tension Pulley Covers. Now, I need help (in detail cause I'm a little 
when it comes to technical terms) on install. I don't think I have all the necessary hardware. Please help! Thanks in advance!
Dave
when it comes to technical terms) on install. I don't think I have all the necessary hardware. Please help! Thanks in advance!Dave
Drifting
Joined: Oct 2002
Posts: 1,710
Likes: 0
From: Langhorne PA
Don't know about the fuel rail cover, but the Idler pulley cover requires a 10mm X1 bolt for the front of the passenger head, and a 1/4-20 nut and bolt to fasten to the unused hole in the front of the idler pulley bracket (unless you have an '04, in which case that hole isn't there)
Thread Starter
Race Director
Joined: Feb 2004
Posts: 11,651
Likes: 9
From: HOW FAST WAS I GOING OFFICER? Los Angeles Hating GM Dealership Service Dept.'s Since Sept. 2004
St. Jude Donor '04-'05-'06-'07
Thanks for the info. That should be a good start! You guys are awesome! 
