Halltech Stinger GP Intake System is a go!!!
Thread Starter
Supporting Vendor
Joined: Jan 2000
Posts: 5,683
Likes: 14
From: TX
Cruise-In I Veteran
St. Jude Contributor '04
Halltech Stinger GP Intake System is a go!!!
By popular demand, the Halltech Stinger GP is back! Special pricing is good from today through September 5th. Heres the deal:
1-5 orders, 225.00 plus shipping.
6-10 orders, 199.00 plus shipping.
11+ free shipping.
From Halltech's Website
The Halltech Stinger Intake is our newest intake system, and is one of the best intake systems available for the money. It features the same 25% more than stock flow numbers of our TRAP, but is an underhood intake, which does not capture cold air as does the TRAP. Ease of installation, and cost will make this one of the most popular Halltech intakes ever. The Tunnel Bridge replaces the stock bridge, which is the most restrictive part of the C5 intake system. With our 100 mm straight shot at the throttle body and 15% more plenum volume, coupled with the largest filter ever made for the C5, you'll feel the power. This is the same filter made for the TRAP, but it has been redesigned for simple installation at the end of the MAF. No cutting, no lift required, just 5 minutes to install. Kit comes with instructions and carries a lifetime warranty.
Thank you and please email us for questions on this product.
Nate
__________________
Corvette Garage Inc
Xtreme Motorsports
1.806.863.3800
Website: Click here for Corvette Parts and Accessories!
Email: sales@corvettegarage.com
---------------------------------------------------
Corvette Garage Inc
Xtreme Motorsports
1.806.863.3800
Website: Click here for Corvette Parts and Accessories!
Email: sales@corvettegarage.com
---------------------------------------------------
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
BBftB
Originally Posted by QuikZilver
TTT for ya.
I already have the Stinger-R and it is a great setup for the money!! Bridge and larger air filter together for that price, you can't beat it!
I already have the Stinger-R and it is a great setup for the money!! Bridge and larger air filter together for that price, you can't beat it!
100% This is the best bang for the buck system out there, bar none!I gained a huge seat-of-the-pants boost after installing this intake system. Also, for those of you who don't normally drive through monsoon rainstorms, you might want to try my cold air mod - downloadable from the Halltech website - see http://www.corvettec5.com/installinfo.html
to ensure all that power doesn't get "dialed back" when the underhood temps exceed 100 degrees.
Last edited by Dave68; Aug 20, 2004 at 06:53 PM.
Thread Starter
Supporting Vendor
Joined: Jan 2000
Posts: 5,683
Likes: 14
From: TX
Cruise-In I Veteran
St. Jude Contributor '04
Heres the link for the GP on our website!
http://www.corvettegarage.com/produc...roducts_id=274
Nate
http://www.corvettegarage.com/produc...roducts_id=274
Nate
Racer
Joined: Jun 2004
Posts: 323
Likes: 5
From: Austin Texas
How much is shipping to Texas?
Originally Posted by Nate@CorvetteGarage
Heres the link for the GP on our website!
http://www.corvettegarage.com/produc...roducts_id=274
Nate
http://www.corvettegarage.com/produc...roducts_id=274
Nate
Instructor
Joined: Jul 2004
Posts: 111
Likes: 0
From: Vancouver WA
Originally Posted by QuikZilver
TTT for ya.
I already have the Stinger-R and it is a great setup for the money!! Bridge and larger air filter together for that price, you can't beat it!
I already have the Stinger-R and it is a great setup for the money!! Bridge and larger air filter together for that price, you can't beat it!
I completely agree I just installed mine today; it's my first mod (other than CLB).
I can really tell the engine is breathing better, less bogging and snappier acceleration. The install was fairly easy, and the car ran great with no codes at all. 
Le Mans Master
Joined: Jul 2004
Posts: 5,216
Likes: 1
From: Vette Doctors Performance RX450 - 466RWHP !!!
Ordering mine tonight. What is involved in the installation? 
add on.....also ordered the FLush mount tail lamp kit. waiting on the entire order until the GP is over next week.
Good luck with the mods!!!!!!!!!!!!!!!!!!
add on.....also ordered the FLush mount tail lamp kit. waiting on the entire order until the GP is over next week.
Good luck with the mods!!!!!!!!!!!!!!!!!!
Last edited by F.J.B.; Aug 24, 2004 at 02:16 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Instructor
Joined: Jul 2004
Posts: 111
Likes: 0
From: Vancouver WA
Originally Posted by F.J.B.
Ordering mine tonight. What is involved in the installation?
Go to Halltech’s site it has complete instructions, click on instillation. Or click on the link below.
http://www.corvettec5.com/store/?pag...2eaf1682b4a413
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
Originally Posted by Shark01
Does anybody have independent dyno numbers for this product added to a stock C5?
Nate, will you be listing the number sold so we can keep up with the discount gates?
Nate, will you be listing the number sold so we can keep up with the discount gates?
http://forums.corvetteforum.com/showthread.php?t=825702
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
Originally Posted by BigTMan
Any issues with the filter not being as good as say the stock for keeping hte engine clean? Is it the same type of filter as a K&N, cleanable etc?
I have the Remay, although the K&N-style cotton would suit me just as well.
Le Mans Master
Joined: Jul 2004
Posts: 5,216
Likes: 1
From: Vette Doctors Performance RX450 - 466RWHP !!!
Ok.....Its ordered and being send out next week when the GP ends. The mods have begun.... dont anyone tell my wife... she thinks the car is remaining stock.
Race Director
Joined: Dec 2000
Posts: 19,304
Likes: 85
From: San Diego CA
Originally Posted by F.J.B.
Ok.....Its ordered and being send out next week when the GP ends. The mods have begun.... dont anyone tell my wife... she thinks the car is remaining stock.
Le Mans Master
Joined: Jul 2004
Posts: 5,216
Likes: 1
From: Vette Doctors Performance RX450 - 466RWHP !!!
Originally Posted by Dave68
Surely, you can keep a $199.00 receipt away from her! It'll be the best return on the dollar you'll make - an excellent first mod.
Still trying to keep the pricetag from the car away from her!!!!!!!!!!!!!!!
So yes your right.......this mod wont hurt.
