AFR Cylinder Heads EVERYWHERE!!
Thread Starter
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
AFR Cylinder Heads EVERYWHERE!!
We just received 8 sets of AFR 205s!! Wow thats alot of heads to unload at one time 
We are flowing a set today & getting them decked to various customers specs. I'll post the flow #'s this afternoon & how they compare to the PRC head that we just installed on the 4400 stall a4 car If any of you guys are wanting a set of the heads we are still offering them at 2182 with free shipping!!
Jason
Texas Speed
www.texas-speed.com
806.866.0734
We are flowing a set today & getting them decked to various customers specs. I'll post the flow #'s this afternoon & how they compare to the PRC head that we just installed on the 4400 stall a4 car If any of you guys are wanting a set of the heads we are still offering them at 2182 with free shipping!!Jason
Texas Speed
www.texas-speed.com
806.866.0734
Burning Brakes
Joined: Nov 1999
Posts: 901
Likes: 83
From: Los Angeles
Along those lines:
How much of a mill will yield 11:1 (.30 for a 62cc or more ?) with say a .43 cometics gasket? I know LGM used a 59cc in testing for their results.
What is the largest cam lift/duration you would recommend with heads milled 59-62cc (whatever chamber size yields "about" 11:1) without shaving pistons?
What pushrod length ? (w/ aftermarket cam)
That is all ! Thanks for any and all input.
How much of a mill will yield 11:1 (.30 for a 62cc or more ?) with say a .43 cometics gasket? I know LGM used a 59cc in testing for their results.
What is the largest cam lift/duration you would recommend with heads milled 59-62cc (whatever chamber size yields "about" 11:1) without shaving pistons?
What pushrod length ? (w/ aftermarket cam)
That is all ! Thanks for any and all input.
