here is a pic of mine on the CCW 18/11.5's.
Will 335-18 fit?
Resident moron
Joined: Jun 2003
Posts: 4,746
Likes: 20
From: Assachusetts
Originally Posted by Snake Slayer
Yes I run 335 X 30x18's on 11 inch Mallets. 
Thanks,
Dope
Racer
Joined: Feb 2002
Posts: 352
Likes: 0
From: Langhorne Pa
Originally Posted by HIGHRPM
They will fit, but your not getting the flat contact patch you think your getting....you need a 12"-13" wide wheel for proper fit and traction.
I have 335's mounted on a 12 wheel and the car is tubbed. Others will say you can get away without tubbing but I bit the bullet for piece of mind.
Racer
Joined: Feb 2002
Posts: 352
Likes: 0
From: Langhorne Pa
Here's a link for anyone who wants to see them on the car.
http://community.webshots.com/user/lylehadden
http://community.webshots.com/user/lylehadden
Safety Car
Joined: Sep 2000
Posts: 3,517
Likes: 529
From: Tampa, FL
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Originally Posted by Dope
Do you have any pics? I have 18x11 mallets and would be interested in seeing how they fit on the wheel and on the car. Any rubbing issues? I will email ya a few... no rubbing issues.
Thanks,
Dope
Thanks,
Dope
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski