DTE Rocks!!
Thread Starter
Pro
Joined: Apr 2003
Posts: 623
Likes: 0
From: dallas texas
DTE Rocks!!
Hi Guys...I just want to let everyone know what a great company DTE is!! I have a DTE diff with a hardened output shaft. I went to the dragstrip this weekend ,and had a problem with their differential.
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!!
Wash
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!!
Wash
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by Geneus
Chris is going to hold my hand if something bad happens at the track, right Chris? 
you Mr. funny guy
Thread Starter
Pro
Joined: Apr 2003
Posts: 623
Likes: 0
From: dallas texas
Originally Posted by Earl H
So....what did you run????????????????????????? 
so there wasnt any time,but the flatbed took 3 hours Wash
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Sep 2002
Posts: 3,064
Likes: 95
From: MI
Originally Posted by washguy
Earl...Well,the car only made it 6 feet from the tree so there wasnt any time,but the flatbed took 3 hours Wash
so there wasnt any time,but the flatbed took 3 hours Wash
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by washguy
Hi Guys...I just want to let everyone know what a great company DTE is!! I have a DTE diff with a hardened output shaft. I went to the dragstrip this weekend ,and had a problem with their differential.
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!! Wash
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!!
Wash
Le Mans Master
Joined: Jul 2002
Posts: 6,147
Likes: 32
From: Dallas TX
Guys, you can get the stage 99 differential with all the hardened shafts and a brace and there is still a possibility of breaking things if you race your car. All you can try to do is minimize that possibility.
Le Mans Master
Joined: Dec 2003
Posts: 5,561
Likes: 448
From: Atlanta metro Ga.
Originally Posted by kumar75150
Guys, you can get the stage 99 differential with all the hardened shafts and a brace and there is still a possibility of breaking things if you race your car. All you can try to do is minimize that possibility.
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by kumar75150
Guys, you can get the stage 99 differential with all the hardened shafts and a brace and there is still a possibility of breaking things if you race your car. All you can try to do is minimize that possibility.
I want bulletproof man!
Le Mans Master
Joined: Jan 2003
Posts: 6,298
Likes: 0
From: Tyler TX
Wash" you went racing? Did that big foot" get to heavy" 
Originally Posted by washguy
Hi Guys...I just want to let everyone know what a great company DTE is!! I have a DTE diff with a hardened output shaft. I went to the dragstrip this weekend ,and had a problem with their differential.
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!! Wash
I didnt expect any help of any kind from them,cause yes I was racing!
I just wanted Phil to know what happened for their engineering data.
Without hesitation Phil offered the part that broke for no cost! nada zippo!
THANK YOU PHIL!!! you are true gentleman...and a racer's friend!
you have a customer that is sooo grateful for your help!
THANKS AGAIN!!
Wash
Thread Starter
Pro
Joined: Apr 2003
Posts: 623
Likes: 0
From: dallas texas
Originally Posted by LittleBoyBlu99
Oh....and the wrecker taking three hours still beats any of your times!
Wash