Dynatech SuperMaxx header Install info?
Thread Starter
Melting Slicks
Joined: May 2003
Posts: 2,100
Likes: 52
From: Massapequa Park, NY [This is Not an EXIT]
Dynatech SuperMaxx header Install info?
I did a search and didn't find what i was looking for.
Is there anywhere I can get a decent "how to" or at least some opinions, reviews, or write-ups on installing SuperMaxx headers.
Has anyone had any heat/starter, fit, or quality issues? Anything to watch out for, or reasons not to get these headers over another system?
Am I correct in thinking they look to make around the same power as Kooks?
Is there anywhere I can get a decent "how to" or at least some opinions, reviews, or write-ups on installing SuperMaxx headers.
Has anyone had any heat/starter, fit, or quality issues? Anything to watch out for, or reasons not to get these headers over another system?
Am I correct in thinking they look to make around the same power as Kooks?
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Everything I have seen indicates that all the LT systems are about the same peak number, its the lower RPM band I was more concerned with in making my choice.
ls1howto has a good write-up on the LG's, doubt these are much different.
ls1howto has a good write-up on the LG's, doubt these are much different.
Racer
Joined: Jan 2004
Posts: 458
Likes: 0
From: Brunswick OH
I followed the instructions that came with the headers but didn't pull the valve covers. The drivers side slipped in from the bottom and the passenger from the top. I haven't had any issues with mine. I installed them in 7 hours in the driveway. With tunning all the header make 2-5 hp of each other. I chose the SuperMaxx's because the price and easy install.
Good Luck
Good Luck
