TCS converters???
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,324
Likes: 0
From: central NJ
TCS converters???
Anyone running a converter made by TCS? How do you like it, and have you had any problems with them? The converter Im looking into is a 3800 with a str of 3.0. The only thing that bothers me is that I was just on yanks website and they claim that they and precision industries are the only two converter manufacturers who actually test their converters stall rate on gms machine. ???
Last edited by C5JONNY; Dec 28, 2004 at 01:48 PM.
Instructor
Joined: Aug 2001
Posts: 192
Likes: 0
From: Virginia Chesapeak
I have a (tight) TCS4200 2.7 STR. This converter is VERY streetable and I have not had any problems with it. I replaced a Yank ST3500 with the TCS4200,and there was a very noticeable difference in peformance with the 4200 both from a roll and from a stop. I like my TCS4200 alot, the downside is I believe TCS is no longer in business. 
Last edited by MC98; Dec 29, 2004 at 04:49 AM.
Instructor
Joined: Aug 2001
Posts: 192
Likes: 0
From: Virginia Chesapeak
I have been to the track just once since installing the TCS4200 and I was kicked out after just one run (no roll bar). In spite of a very poor 1.72 60 ft. (I spun coming out of the hole, and my car was running too lean and nosed over on the 2-3 shift) I still managed my best time ever for my car 11.65 @ 118 MPH. I was running a CCW drag package with ET Steets, I have 3.73 gears. How do you like your TSP 231/237 cam? BTW what is TCS phone # is Derek still with the company?
Last edited by MC98; Dec 29, 2004 at 09:21 AM.
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,324
Likes: 0
From: central NJ
Dont have the number on me, but I spoke with a Rusty yesterday. I love the cam, nice and lopey just how I wanted it, makes great power for a cam only. Now I just need to get my tranny issues on track.
Instructor
Joined: Aug 2001
Posts: 192
Likes: 0
From: Virginia Chesapeak
Originally Posted by C5JONNY
Dont have the number on me, but I spoke with a Rusty yesterday. I love the cam, nice and lopey just how I wanted it, makes great power for a cam only. Now I just need to get my tranny issues on track.
Thread Starter
Melting Slicks
Joined: Aug 2002
Posts: 2,324
Likes: 0
From: central NJ
I put down 35x rwhp, and this is with a tc that is not locking up, and a trans that is slipping and banging off the rev limiter. On the track with the bum trans and converter, I still squeaked out an 11.8. I'll get some real numbers when all this tranny crap is done with.
Instructor
Joined: Aug 2001
Posts: 192
Likes: 0
From: Virginia Chesapeak
Originally Posted by C5JONNY
I put down 35x rwhp, and this is with a tc that is not locking up, and a trans that is slipping and banging off the rev limiter. On the track with the bum trans and converter, I still squeaked out an 11.8. I'll get some real numbers when all this tranny crap is done with.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
