[Z06] 2002 z06 cracking plastic trim around windows
#81
Team Owner
Member Since: May 2007
Location: Sarasota Fl. U.S.A.
Posts: 33,498
Likes: 0
Received 19 Likes
on
7 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17
Man, the guy that fixed mine is just a real good body man, I see a lot of his work and see what comes and goes out of his shop.. These leaks or no big deal, find it and fix it, it's easy..
Driveum don't hide um..
#82
Melting Slicks
Hopefully, I'm good
On a side note: My son and I have been playing with Crown Vics which is a lot cheaper
#83
Team Owner
Member Since: May 2007
Location: Sarasota Fl. U.S.A.
Posts: 33,498
Likes: 0
Received 19 Likes
on
7 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17
We put his helper inside the trunk area closed it up, got the water hose out on about half throttle and started at the bottom and worked our way up, boom there it was, mine was coming in right above the fuel fill door..
I have heard of leaks up by the front passenger door and also once in a while the AC tube drain will plug up and leak inside the foot space on the passenger side..
#84
Melting Slicks
Bringing back from the dead as I noticed my 03Z on the driver side has the dreaded crack that is all over this thread. Here is a pic for reference:
I have tried searching on www.paceperformance.com as I usually get my GM parts from there. However, it's not showing the below listed numbers for the molding.
Did GM discontinue this part? Is there anyone out there that has been able to source a reproduction one?
Well never mind. I should have looked at GM parts house website. I found it:
http://store.gmpartshouse.com/parts/...&siteid=214638
$194 for the molding. Is it made of gold?
I have tried searching on www.paceperformance.com as I usually get my GM parts from there. However, it's not showing the below listed numbers for the molding.
The old part numbers: 10422996, 10422997
Have been replaced by: 10331562, 10331563
Have been replaced by: 10331562, 10331563
Well never mind. I should have looked at GM parts house website. I found it:
http://store.gmpartshouse.com/parts/...&siteid=214638
$194 for the molding. Is it made of gold?
Last edited by Not4spd; 06-22-2014 at 06:22 PM.
#85
Burning Brakes
Mine was cracked on the passenger side. Had my car at the dealership for some paint work and the body man filled it in with something. Did it for no charge. Can hardly tell there is anything there and no leaks.
#86
Driver's side cracked on mine. Dealer quoted me the following:
Molding part# 10331563: $208.50
Weatherstripping part# 10333467: $424.05
Total price with labor: $716.46
They did tell me that replacing weatherstripping might not be necessary if the original one can be removed without damage.
Might go with the silicone method somebody posted about.
Molding part# 10331563: $208.50
Weatherstripping part# 10333467: $424.05
Total price with labor: $716.46
They did tell me that replacing weatherstripping might not be necessary if the original one can be removed without damage.
Might go with the silicone method somebody posted about.
#88
Burning Brakes
#90
Melting Slicks
#92
Melting Slicks