Finally!
Thread Starter
Racer
Joined: Jan 2006
Posts: 320
Likes: 0
From: Jackson Township OH
Finally!
After waiting since the 3/8 build date, my LMB MN6 3LT Coup finally showed up at the dealership. GM has not been able to tell me or the dealer where it has been for the least two weeks. The dealer called me Tuesday and said it had been delivered that morning. Wednesday, GM calls the dealer and tells him that the car is back in BG from the off-site quality location (MN6 - clutch/flywheel issue). I would not give GM 2 cents for its logistics or customer service group, but Dave and company did design one fantastic car!
I'll try and post pictures after the weekend wash/clay/wash/rejex process is completed. I've had the car 24 hours, driven 90+ miles and haven't stopped smiling.
I'll try and post pictures after the weekend wash/clay/wash/rejex process is completed. I've had the car 24 hours, driven 90+ miles and haven't stopped smiling.
Le Mans Master
Joined: Dec 2005
Posts: 7,753
Likes: 210
From: North Western Connecticut
Mine arrived at the dealer yesterday and took a little over a week to get from BG to Connecticut. What got me cranked up was that GM said it could take from 3 days to 3 weeks which is almost no answer. Now the tough part is waiting while the calipers get powder coated, CCW wheels and Corsa Sport exhaust are all installed. Mike the owner of “The Powdercoater.com” is working with me to get the calipers done ASAP. He’s a super forum vendor and has really helped me with this project. With a little luck everything should be finished by next Tuesday! Hope to have some pics to post very soon…………..
Pro
Joined: Feb 2004
Posts: 575
Likes: 0
From: Akron Ohio
Originally Posted by cthusker
Mine arrived at the dealer yesterday and took a little over a week to get from BG to Connecticut. What got me cranked up was that GM said it could take from 3 days to 3 weeks which is almost no answer. Now the tough part is waiting while the calipers get powder coated, CCW wheels and Corsa Sport exhaust are all installed. Mike the owner of “The Powdercoater.com” is working with me to get the calipers done ASAP. He’s a super forum vendor and has really helped me with this project. With a little luck everything should be finished by next Tuesday! Hope to have some pics to post very soon…………..
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Melting Slicks
Joined: Jan 2006
Posts: 2,796
Likes: 0
From: Columbus Georgia
My build date was 4/4 and I pick it up at NCM 4/25. That is three weeks! Am I counting? You bet, but the timing is working out just perfectly for me! The wait is getting closer to being over
Melting Slicks
Joined: Jan 2006
Posts: 2,487
Likes: 57
From: Williamsburg Virginia
Mods
cthusker, Are you doing the mods yourself? If so please let us know how it goes. As previously stated I was reluctant to open my brake lines. By the way, CONGRATS!
Blueracer, Sound like you have have great car. Hope you enjoy washing and waxing as much as I have. Did not mean to hijack your thred. Please excuse.
Earl
Blueracer, Sound like you have have great car. Hope you enjoy washing and waxing as much as I have. Did not mean to hijack your thred. Please excuse.
Earl
Last edited by bigearl56; Apr 7, 2006 at 03:35 PM.