Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exterior How-Tos
- How to Install Front License Plate Bracket
Step by step instructions for do-it-yourselfers.
Browse all: Exterior How-Tos
C6 Front License Plate Bracket
#1702
Melting Slicks
For those of you who have bought these like I have, when the tape starts coming loose, what brand tape have you use to replace it with? I have found that their tape just doesn't have the tactiness required to keep it mounted even when going by the mounting instructions to the letter. I nearly lost the plate with the expensive painted plate holder and I just can't afford to buy another matching plate holder at this price point. Scotch Extreme Mounting tape on Amazon only gets 4 stars not 5 so I don't know if this is good enough.
Anyone? Please PM me with info.
Anyone? Please PM me with info.
#1703
Advanced
#1704
Melting Slicks
Member Since: Apr 2005
Location: St. Clairsville OH
Posts: 3,288
Likes: 0
Received 6 Likes
on
5 Posts
Just moved to Ohio, which means a front plate after enjoying 12 years without one. Ordered the removable bracket and the LeMans Blue frame. Hopefully I can run with it removed most of the time.......
#1705
Le Mans Master
Thread Starter
#1706
Safety Car
Member Since: Aug 2017
Location: Etobicoke (Toronto) Ontario
Posts: 4,021
Received 1,789 Likes
on
1,148 Posts
I just installed your removable bracket on my GS with the colored frame and it looks great. However, even though I followed your install instructions, the base plate ended up about 1/4" too deep. No big problem for me because I have a drill press, and two new holes in the bracket solved the problem. I'm not the only one to have had this issue. If the base plate was wider so that it touched the grill at the back and if there were two slots instead of holes in the bracket, then installation would be easier. You'd only need to worry about centering the base plate side to side, and the slots in the bracket would allow you to move the license plate in and out to get as close to the bumper as you wanted. Just my .02 worth.
#1708
Le Mans Master
Thread Starter
Hi Folks, Ray and I have decided that it was time for Top Flight Reproductions www.topflightrepro.com to become a Forum Vendor. For those of you who live in states that require two plates and are interested in a front mount, Top Flight Reproductions has a permanent and removable mount for the C6 and a C6 Z06 removable mount as well . We also sell the GM colored license plate frames which really dress up the front mount. The Installation is very easy, requires no lifting of the car. We have had this product out for over 2 1/2 years now and the customer satisfaction has been fantastic. We appreciate all the nice comments from you forum members who have purchased these products along with inputs for making our product better, we thank you. For those of you who haven't heard of us, check out our website at www.topflightrepro.com or give us a call at 781-279-1279 and ask for Ray. We look forward to hearing from you.
In Stock!
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
The pics below show the Top Flight Reproductions front license plate mount along with one of the new products we are now selling, the RaceMesh lower intake grille in powder coat black.
In Stock!
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
The pics below show the Top Flight Reproductions front license plate mount along with one of the new products we are now selling, the RaceMesh lower intake grille in powder coat black.
#1709
Le Mans Master
Thread Starter
Hi Folks, Ray and I have decided that it was time for Top Flight Reproductions www.topflightrepro.com to become a Forum Vendor. For those of you who live in states that require two plates and are interested in a front mount, Top Flight Reproductions has a permanent and removable mount for the C6 and a C6 Z06 removable mount as well . We also sell the GM colored license plate frames which really dress up the front mount. The Installation is very easy, requires no lifting of the car. We have had this product out for over 2 1/2 years now and the customer satisfaction has been fantastic. We appreciate all the nice comments from you forum members who have purchased these products along with inputs for making our product better, we thank you. For those of you who haven't heard of us, check out our website at www.topflightrepro.com or give us a call at 781-279-1279 and ask for Ray. We look forward to hearing from you.
In Stock!
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
The pics below show the Top Flight Reproductions front license plate mount along with one of the new products we are now selling, the RaceMesh lower intake grille in powder coat black.
In Stock!
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
The pics below show the Top Flight Reproductions front license plate mount along with one of the new products we are now selling, the RaceMesh lower intake grille in powder coat black.
#1711
Instructor
HI, I noticed that you don't have any products in Precision Red (27U), or even its replacement Cobalt Red.
I realize there may be a limited number of Vette's produced with that color.
I would purchase the front plate in that color.
Thanks,
Peter
I realize there may be a limited number of Vette's produced with that color.
I would purchase the front plate in that color.
Thanks,
Peter
#1712
Le Mans Master
Thread Starter
sorry, just a very small market
#1714
Instructor
Good morning,
Do you have a supplier in Canada for the C6 license plate bracket.
I'm not fond of paying $45.00 USD for shipping to Canada on a $99.00 item.
I could get it shipped to Ogdensburg, but if you have a supplier up here, that would be preferred.
Cheers,
Peter
Do you have a supplier in Canada for the C6 license plate bracket.
I'm not fond of paying $45.00 USD for shipping to Canada on a $99.00 item.
I could get it shipped to Ogdensburg, but if you have a supplier up here, that would be preferred.
Cheers,
Peter
#1715
Le Mans Master
Thread Starter
Best Regard
Peter C
Last edited by Top Flight Reproductions; 08-31-2018 at 01:04 PM.
#1717
Peter/Ray,
I just received the permanent base and matching frame and my wife doesn't want me to put them on unless I get stopped.
Can I send back the permanent bracket and upgrade to a removable bracket?
I'll send you my transaction ID via PM.
Thanks,
Dave
I just received the permanent base and matching frame and my wife doesn't want me to put them on unless I get stopped.
Can I send back the permanent bracket and upgrade to a removable bracket?
I'll send you my transaction ID via PM.
Thanks,
Dave