Headers
Thread Starter
Advanced
Joined: Dec 2007
Posts: 82
Likes: 0
From: chandler az
Headers
I have an 07 C6 Z51 A6. I currently have corsa sport exhaust and would like to install headers. Could anyone recommed and brand, long tube, etc. The header system would have to be compatable with the corsa exhaust. Thank you in advance.
Le Mans Master
Joined: Feb 2006
Posts: 5,762
Likes: 4
From: Chandler Arizona
Also, for a good installation (I did mine myself), I'd recommend Arizona Dynochip in Chandler.
CF Senior Member
Joined: Feb 2006
Posts: 23,313
Likes: 25
From: Tucson Arizona
Do a search and you'll find WAY TOO MUCH debate on this subject. It comes down to three good setups: LG Long Tube Pros, Kooks, and ARH. All of them are excellent, I went with the LG's (but don't get the street series).
Also, for a good installation (I did mine myself), I'd recommend Arizona Dynochip in Chandler.
Also, for a good installation (I did mine myself), I'd recommend Arizona Dynochip in Chandler.
My preference was LG Pro long tube headers. I also opted to have them coated. Another suggestion for an excellent Corvette shop is Xtreme Motorsports in Tempe...they're 'Corvette guys' and do first-rate work.
2005 Beast
Joined: Oct 2007
Posts: 2,586
Likes: 8
From: Tarpon Springs FL
Nobody really mentions them but I really like Melrose Headers myself. However, I have a Magnaflow exhaust which I like because its not too loud but if I rev it up you can certainly tell I'm there 
Burning Brakes
Joined: Sep 2006
Posts: 1,100
Likes: 350
From: Auburn Mass
If you have the Corsa H pipe for the A6 in place, ( as I did ), Kooks makes headers and cats that will mate up to them. The H, in my opinion is critical to the lack of drone, and needs to be left in place. I even put Stingers on the back, leaving the H in place, and still no drone. Works great.
Burning Brakes
Joined: Dec 2004
Posts: 793
Likes: 0
From: Wheaton Illinois
If you have the Corsa H pipe for the A6 in place, ( as I did ), Kooks makes headers and cats that will mate up to them. The H, in my opinion is critical to the lack of drone, and needs to be left in place. I even put Stingers on the back, leaving the H in place, and still no drone. Works great.
Goon Squad King of Battle
Joined: May 2008
Posts: 118,306
Likes: 923
From: 🐑🐑🐑🐑🐑🐑🐑🐑🐑🐑🐑
St. Jude Donor '08 thru '23
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Jun 2008
Posts: 1,746
Likes: 35
From: Jupiter Fl
Melrose all the way on mine. Plus they dont discolor like stainless headers do.
Advanced
Joined: May 2008
Posts: 99
Likes: 0
From: Canora SK
