what is difference in shift knobs??

Reply Subscribe

Thread Tools

Search this Thread

Dec 1, 2008 | 10:39 PM

LT1driver

Thread Starter

Le Mans Master

Joined: Oct 2000

Posts: 6,209

Likes: 33

From: Texas-out west

what is difference in shift *****??

I understand 05-06 shift ***** and the 07-08 ***** are different, is this so and what are the differences....thanks

Dec 1, 2008 | 10:41 PM

VettedCandidate

Melting Slicks

Joined: Aug 2008

Posts: 2,999

Likes: 2

Some are newer than the others...

Sorry man, I don't know but will watch to see what the diff is.

Dec 1, 2008 | 10:46 PM

XCELER8

Le Mans Master

Joined: Jan 2001

Posts: 8,238

Likes: 0

From: Lakeland, Center of Florida Fl

A4 in 05 retains the standard A4 top button when they went to an A6 auto trans went to a front button.

Then there is always modders like me that have an A4 w/ an A6 shifter..

Dec 2, 2008 | 12:54 AM

Swiftrider08

Safety Car

Joined: Aug 2007

Posts: 4,836

Likes: 9

From: Rushsylvania Ohio

Quote:

Originally Posted by LT1driver

I understand 05-06 shift ***** and the 07-08 ***** are different, is this so and what are the differences....thanks

You didn't say manual or auto trans, but if you are talking manual, then the **** for 05-07 is the same and it changed in 08. The mounting screw hole location is different and the 08 version uses a chrome ring that is held on with a cam type groove and pin. The chrome ring is attached to the boot where the 05-07 versions just have the boot rolled up over a ramp.

See pictures (08 **** is on the right):

Dec 2, 2008 | 06:51 AM

talon90

Team Owner

Joined: Aug 2002

Posts: 35,617

Likes: 167

Tech Contributor

Cruise-In 11 Veteran

NCM Ambassador

St. Jude Donor '05-'06-'07-'10

Quote:

Originally Posted by XCELER8

A4 in 05 retains the standard A4 top button when they went to an A6 auto trans went to a front button.

Then there is always modders like me that have an A4 w/ an A6 shifter..

Quote:

Originally Posted by Swiftrider08

That about covers it.

Jun 7, 2009 | 09:49 AM

GigaHz

Drifting

Joined: Jun 2006

Posts: 1,757

Likes: 0

From: Quakertown PA

On the intructions it said to pull the boot down. Actualy you must twist the chrome ring and then the screw shows up. Thanks for the help. I had to put the boot back together.

Jun 7, 2009 | 04:45 PM

TCW

Le Mans Master

Joined: Jan 2001

Posts: 6,447

Likes: 371

From: Maryville TN

St. Jude Donor '06-13,'16-'17, '19

Nice post Swiftrider08!

Tom

Feb 24, 2010 | 06:35 AM

MarkRx

Safety Car

Joined: Dec 2007

Posts: 4,247

Likes: 8

From: Austin TX

I know this is an old thread resurection, but with the 2010 model out, i'd like to see if the shift **** and boot setup is the same. We learned last year that gm replaced the Z06 shift box to the C6 one that has the rubber bushings. There is a new outer shift boot cover for the 2010. It wouldnt suprise me if GM changed the shift **** up as well. I can tell the 08+ ***** sit about 1/4 inch lower on the shift lever.

Also can anyone conform that an 08 shift **** will not work on an 07 shifter? What if one has the upgraded shift box (part # 25823572) which is supposed to be a 2010 shift box that is used on both the 2010 C6 and Z06. Inquiring minds wanna know

Last edited by MarkRx; Feb 24, 2010 at 07:00 AM.