-- It's tough to find a buyer, who has the same taste for mods, as you. -- 
--
Car value
Thread Starter
Instructor
Joined: Jan 2007
Posts: 152
Likes: 0
From: Houston Texas
Car value
I have a 2007 black C6 Z51 coupe with 31,000 miles. It has a rear widebody with $8500 Vellano 3-piece forged wheels. It is lowered with blacked out tail lights and side markers. It also has Kooks headers with high flow cats, corsa sports exhaust, and a callaway intake. It has a Kenwood DNX-5120 installed.
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?
Goon Squad King of Battle
Joined: May 2008
Posts: 118,306
Likes: 923
From: 🐑🐑🐑🐑🐑🐑🐑🐑🐑🐑🐑
St. Jude Donor '08 thru '23
Uff tough call. It's worth what someone is willing to pay for it. I know... lame answer.
You need the 'right' buyer. Otherwise, it aint worth ****.
You need the 'right' buyer. Otherwise, it aint worth ****.
Melting Slicks
Joined: Mar 2005
Posts: 2,343
Likes: 16
From: las vegas NV
probably about $36k. Mileage is high and the only mod that is worth money is the widebody on the rear and the wheels. I just bought a 2007 3Lt, nav, F55 and chrome wheels with the A6 tranny for less than $30k. So I would say that $36k would be about what you could get for it if not less. And that is if it is the 3LT package
Racer
Joined: Feb 2008
Posts: 308
Likes: 0
I have a 2007 black C6 Z51 coupe with 31,000 miles. It has a rear widebody with $8500 Vellano 3-piece forged wheels. It is lowered with blacked out tail lights and side markers. It also has Kooks headers with high flow cats, corsa sports exhaust, and a callaway intake. It has a Kenwood DNX-5120 installed.
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?
Race Director
Joined: Dec 2007
Posts: 19,574
Likes: 167
From: Frederick, MD
Unless you are willing to wait a long time for the right buyer, you are basically selling a 2007 C6 with average-high miles.
Do you still have the stock parts? I would suggest putting them back on and selling the aftermarket parts separately. Obviously you can't with the wheels/wide body.
You can always put it on the market for about $40k and hope that there is someone out there that would mod the car the same way, has the ability to pay for it and decides that a 2 year old car is ok for a similar price as a new car. Used Z06s are in that range also.
Do you still have the stock parts? I would suggest putting them back on and selling the aftermarket parts separately. Obviously you can't with the wheels/wide body.
You can always put it on the market for about $40k and hope that there is someone out there that would mod the car the same way, has the ability to pay for it and decides that a 2 year old car is ok for a similar price as a new car. Used Z06s are in that range also.
Melting Slicks
Joined: Sep 2007
Posts: 2,067
Likes: 1
From: --- N.E., Pa.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Melting Slicks
Joined: Jun 2007
Posts: 2,673
Likes: 9
From: Upstate New York
Wide-body conversions seem to be popular so I would think someone out there would be interested in a car with this already done. As for the performance mods, I think that is a wash - you don't get much back from those unless you pull them and sell the items separately...assuming you still have the stock parts.
But there is always an exception to the rule, try selling it as-is first and see what happens.
But there is always an exception to the rule, try selling it as-is first and see what happens.
Race Director
Joined: Oct 2004
Posts: 10,089
Likes: 14
I have a 2007 black C6 Z51 coupe with 31,000 miles. It has a rear widebody with $8500 Vellano 3-piece forged wheels. It is lowered with blacked out tail lights and side markers. It also has Kooks headers with high flow cats, corsa sports exhaust, and a callaway intake. It has a Kenwood DNX-5120 installed.
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?
Just trying to get an idea of what it would sell for..
What would it sell for? What exact price or around what price range?