Master Blaster
Safety Car
Joined: Sep 2006
Posts: 4,364
Likes: 408
From: Greer, SC
I have had one for 4 years. I like it but if I had to do it again, I'd pass. Still takes 10-15 to get it completely dry and only takes me a little longer with my micro fiber drying towels. Probably less of a chance of scratching with the Master Blaster. Just my opinion.
Safety Car
Joined: Apr 2004
Posts: 3,996
Likes: 77
From: Louisville KY
I have more,time than money, therefore my Stihl gas leaf blower and towels to touch up work absolutely great. I can not justify $330 for something to blow water off a car, when I have something that does that and another job as well.
My Stihl, blows grass off sidewalks, blows leafs, blows dry powdery snow, blows dust/dirt/etc out of my garage, and dries my car. That is a real deal, and it was a lot less than $330.
My Stihl, blows grass off sidewalks, blows leafs, blows dry powdery snow, blows dust/dirt/etc out of my garage, and dries my car. That is a real deal, and it was a lot less than $330.
Team Owner
Joined: Apr 2008
Posts: 51,040
Likes: 1,159
From: S/W ,Fla-Ohio State Football isn't a matter of life or death,Its Much More serious than that
Pro
Joined: May 2008
Posts: 577
Likes: 2
From: Downriver MI
Master Blaster
I use my MB to dry the Vette, Harley and the F-450 power stroke. When I'm not using it for my toys then I blow the garage out. Nice tool, I only wish they had better casters on it. Maybe ones that swivel on the front end.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Safety Car
Joined: Nov 2012
Posts: 3,975
Likes: 2,593
From: Gettysburg PA
2020 C8 of the Year Finalist - Unmodified
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
It's just a lazy way to dry but not the best way. Part of a good wash job is using an absorber
(yes 10 bucks anywhere lasts for years) Then spend some money on a really nice micro fiber. After the wash you will find a thing or two you didn't see but will when you blow it off! The absorber gets the final cleaning of something like bug guts. Then take the corner of it to do the tail light lens gap at the bottom and under the mirror's.
Done right nothing comes out when you drive off!
Last edited by 3 Z06ZR1; May 6, 2013 at 05:22 PM.
Pro
Joined: Apr 2013
Posts: 700
Likes: 2
From: SC
IMO
It's just a lazy way to dry but not the best way. Part of a good wash job is using an absorber
(yes 10 bucks anywhere lasts for years) Then spend some money on a really nice micro fiber. After the wash you will find a thing or two you didn't see but will when you blow it off! The absorber gets the final cleaning of something like bug guts. Then take the corner of it to do the tail light lens gap at the bottom and under the mirror's.
Done right nothing comes out when you drive off!
It's just a lazy way to dry but not the best way. Part of a good wash job is using an absorber
(yes 10 bucks anywhere lasts for years) Then spend some money on a really nice micro fiber. After the wash you will find a thing or two you didn't see but will when you blow it off! The absorber gets the final cleaning of something like bug guts. Then take the corner of it to do the tail light lens gap at the bottom and under the mirror's.
Done right nothing comes out when you drive off!
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
__________________
..................Click for
..................Click for
Last edited by CCA Corvette Parts; May 6, 2013 at 05:58 PM.
Advanced
Joined: Oct 2012
Posts: 97
Likes: 0
From: Vancouver BC
St. Jude Donor '13-'14-'15-'16
[QUOTE=RoadkingC6;1583818411]
I just checked mine and it says 4.0 + 4.0 Peak HP. Like any electric motor, it does not run at peak HP., that is the HP it can produce if it was stalled. (forced to quit running).
I can run mine on a 15 Amp service, start one motor, wait 20 seconds,
then start the other. If I start both at the same time, good chance it will trip the breaker. However I installed another 20 Amp circuit just in case I forget and start both motors at the same time.
Hope this helps.
I wonder how Metro equates Horse Power to Amps. It is a know fact that 1 HP = 746 watts (in round numbers). They say you need a 20 Amp circuit to run their 8 HP (peak) motors (2 4 HP motors). If they truly have two 4 HP motors you would have:
8 HP * 746 watts / 120 volts = 49.73 Amps to run these motors. They claim 19 Amps.
Never thought about it before but the math above is correct, they have to be lying about the horsepower rating, even if only one motor was running at a time you would still be over the amperage rating.
8 HP * 746 watts / 120 volts = 49.73 Amps to run these motors. They claim 19 Amps.
Never thought about it before but the math above is correct, they have to be lying about the horsepower rating, even if only one motor was running at a time you would still be over the amperage rating.
I can run mine on a 15 Amp service, start one motor, wait 20 seconds,
then start the other. If I start both at the same time, good chance it will trip the breaker. However I installed another 20 Amp circuit just in case I forget and start both motors at the same time.
Hope this helps.
Team Owner
Joined: Apr 2008
Posts: 51,040
Likes: 1,159
From: S/W ,Fla-Ohio State Football isn't a matter of life or death,Its Much More serious than that
[QUOTE=Krazy_Legs;1583830256]
I just checked mine and it says 4.0 + 4.0 Peak HP. Like any electric motor, it does not run at peak HP., that is the HP it can produce if it was stalled. (forced to quit running).
I can run mine on a 15 Amp service, start one motor, wait 20 seconds,
then start the other. If I start both at the same time, good chance it will trip the breaker. However I installed another 20 Amp circuit just in case I forget and start both motors at the same time.
Hope this helps.
I just checked mine and it says 4.0 + 4.0 Peak HP. Like any electric motor, it does not run at peak HP., that is the HP it can produce if it was stalled. (forced to quit running).
I can run mine on a 15 Amp service, start one motor, wait 20 seconds,
then start the other. If I start both at the same time, good chance it will trip the breaker. However I installed another 20 Amp circuit just in case I forget and start both motors at the same time.
Hope this helps.
Le Mans Master
Joined: Sep 2004
Posts: 5,116
Likes: 5
From: Livonia MI
I'm sure the Master Blaster is a good tool, but already have enough stuff laying around. Have a small carry around Hoover Porta Power vacuum I've been using around the house for years. Not powerful as a Master Blaster, but pretty good. Great for vacuuming cars, and reverse the hose for a strong blower. Don't completely dry the car with it, but dry out the mirrors and around trim. Inflates air mattresses and such, and been paid for years ago. Works for me.