Diminished Value
The Chevy Dealership that performed my repairs was little to no help with the Diminished value claim. Their body shop urged me to do one, but beyond that the sales side of the dealership 'wanted nothing to do with it', there words not mine. Hopefully because they didn't sell that many Corvettes and not just because I didn't buy from them. I contacted a Forum Dealer and within a day after sending them all of my documentation they gave me their estimate of what they would deduct if I were to trade the vehicle in with said damage. They also gave me an estimate for what the private sale would be. In both instances the difference was $5000.00.
The Insurance company of the lady that hit me settled rather eagerly at that price. Could I have gotten more? I don't know and frankly I don't care. The fact is that no matter how much monetary value someone places on a Corvette's Diminished Value it will be difficult if not impossible to sell far at least one full generation cycle.
Looks like you are in the same boat as me. Stuck with a beautiful car that no one will know anything was ever done to it until they read the carfax. Then they will never by it. I bet they all married virgins too!

But what a car to be "stuck with".
http://www.carinsurance.com/kb/content37286.aspx
You may be able to go after the other party's insurance company...
http://abcnews.go.com/Business/car-w...ry?id=10713550
But to lump all businesses of a specific genre (or ALL business) together? Nah. Your glass must be half full.
Sorry.
Don't want it shut down because it turns into a dealer love/hate fest. And either way the glass is filled, there's room for more beer!
I have repaired C2's thru C6's and am very comfortable driving any of the cars that I have worked on. Lately, it's getting easier to buy original color matching panels so no painting is involved. While I am **** to get the right screws in the correct places and my panel lines are better than factory, some people do sloppy work. Check the car for workmanship.
Just for the fun if it, I would like to offer a challenge to other owners. Go out and measure the wheel base on the right side of your car and then on the left side. Even if you have not had damage, you will find that most Corvettes do not have the same wheel base on the right and left from the factory. When a good frame shop is done with a car the wheel base will not only be correct on the left and right, but will also be measured in the X dimension and be correct.
The Best of Corvette for Corvette Enthusiasts
Yup, sorry about that. I wish you well in your dealings with the carrier.
I have repaired C2's thru C6's and am very comfortable driving any of the cars that I have worked on. Lately, it's getting easier to buy original color matching panels so no painting is involved. While I am **** to get the right screws in the correct places and my panel lines are better than factory, some people do sloppy work. Check the car for workmanship.
Just for the fun if it, I would like to offer a challenge to other owners. Go out and measure the wheel base on the right side of your car and then on the left side. Even if you have not had damage, you will find that most Corvettes do not have the same wheel base on the right and left from the factory. When a good frame shop is done with a car the wheel base will not only be correct on the left and right, but will also be measured in the X dimension and be correct.
However. Resale value is driven by perception. Most people buying, will think a car with a history of significant damage may have problems in the future with those repairs. Maybe because they've seen that personally or know someone who had problems with bad repair work in the past. The more the repair cost the more likely that perception.
Makes sense?
Even reputable car dealers, like my wives BMW dealer said they would not offer her a trade-in value after her Mini Cooper was rear-ended (other party at fault) and repaired by their facility. Repair cost was about $5k. But they had a note of "frame damage" in the record even though it's unibody, and the service manage said "frame damage" was difficult to categorize for unibody construction as our damage was minor and not really frame related. From our perspective the damage was repaired to like new.
Thing is, resale value is at least $5k less than her car without damage. And the dealer we purchased from will not take our car as a trade-in because of their maintenance records even though their company did the repairs to like new.
How do you put a number on your value loss when the damage repaired to like-new means they will not take your car as a trade-in??
From what I understand, that's the basis in most states for a diminished value claim. Even with repairs like new, value is lost. And most buyers as well as my wife's BMW dealer seem to know that. So typical buyers will diminish the value. And a dealer like BMW with a Certified Pre-owned vehicle qualification? Your damaged car, even though repaired like new by the best repair shop in the country, may not qualify.
Bottom line? Enjoyment value is all about the quality of repair if you want to drive it. But resale value is not so much about the quality of repair as the buyers perception value directly related to the dollar amount of former damages and likeliness of future problems.
Just sayin.
If the Op's intent was flipp'n, then I just wasted my time post'n. If that's true take note so you don't waste your time posting to this thread too.
jer
Last edited by lvjetboy; Jul 19, 2014 at 03:20 AM.
... Anyway, I agree that $1,500 is too low for diminished value -- especially for a Corvette. But fighting State Farm to get more may be very difficult.
That is odd, State Farm insured the lady that caused my accident and they accepted my appraisal very quickly (within 5 minutes).




That is odd, State Farm insured the lady that caused my accident and they accepted my appraisal very quickly (within 5 minutes).
Bill




I am. Interesting thing though... we're both insured by State Farm!
Try to keep this on topic, please
Don't want it shut down because it turns into a dealer love/hate fest. And either way the glass is filled, there's room for more beer!

It seems you took a substantial front end hit and I was wondering if the cost of repairs included replacing the air bags and seat belts that were being used at the time?
Bill
Vibration damper repairs are not required to be reported, accidents are, that is a big difference.
For the OP, $12k of damage is not cosmetic. Vettes panels don't cost that much and that is if you damage every single panel.

I have owned 25 vettes and of those I bought one with a salvage title that was a stolen car that was recovered undamaged after the owner had been paid off. I had verifiable proof that the car had not been damaged but when it came time to sell it I had a very tough time finding a buyer and ended up getting half of what it would have gone for with a clean title. Never again no matter how low the price is.
I have a 05 C6 that was immaculate until yesterday. My buddy's wife didn't watch backing out of their driveway when I was visiting for the weekend. She caught the front bumper, the scratches waxed out, but the tail pipe left a half moon shaped indentation in the bumper. I wish it would have been someone other than her who would have hit it. It's awfully hard to even really get too mad at someone who ***** for an hour because she just ran into my perfect Corvette. I'm not sure I even want to have it fixed and risk having a mismatched bumper or if I want any paint work done on it. I know one of the first things I always ask when buying a used vehicle is if it has ever had any paint work done on it. If I have it fixed what kind of diminished value am I looking at for something like this, that I can no longer say that it has never had any paint work done. Is this car getting old enough that buyers won't worry in 2-3 years when I sell it?
What would you guys do?
Last edited by flatlander_summit; Jul 21, 2014 at 01:49 PM.
Air bags did not deploy, seat belts were not replaced. Some panels, like the driver's side quarter panel, had just the right damage to have to replace rather than repair (i.e. quarter sized hole through panel).















