Black Crossflag Emblems
Le Mans Master
Joined: Aug 2006
Posts: 5,308
Likes: 2,210
From: San Antonio, TX
I had the overlays and it looked great. They lasted about 3 years. I couldn’t find replacement overlays or black emblem so I replaced the emblems to the 100 year ones. My car is a 2012 so it makes sense.
What year is your GS?
Last edited by jbc1995fb; Feb 20, 2018 at 09:04 AM. Reason: added photos
Race Director
Joined: Nov 2017
Posts: 12,759
Likes: 10,657
From: Prosper TX/Austin TX
2020 C6 of the Year Winner - Modified
Thanks - not hard to do at all. Use fishing line or I used weed trimmer line to slide between the emblems & the car to cut the double-sided tape holding them on. Each emblem has two little posts that fit into holes in the bumpers so be careful of those. Clean off the emblems & tape residue, scuff up the chrome a little then I used a primer, gloss black, then several coats of clear. Apply new tape and stick them back on.
Or you could have them wrapped in vinyl.
Or you could have them wrapped in vinyl.
Last edited by JABCAT; Feb 20, 2018 at 09:04 AM.
Race Director
Joined: Mar 2011
Posts: 13,262
Likes: 3,151
From: SW Florida
2021 C6 of the Year Finalist - Modified
Chevrolet began as a company 3 Nov, 1911 .... making the 2011 the 100th Centennial Aniversary.
https://en.wikipedia.org/wiki/Chevrolet
.
Last edited by Turbo6TA; Feb 20, 2018 at 09:52 AM.
Thread Starter
Melting Slicks
Joined: Jul 2014
Posts: 2,134
Likes: 204
If you think about it, GM made a BIG MISTAKE when designating 2012 as the 100th Aniversary of Chevrolet.
Chevrolet began as a company 3 Nov, 1911 .... making the 2011 the 100th Centennial Aniversary.
https://en.wikipedia.org/wiki/Chevrolet
.
Chevrolet began as a company 3 Nov, 1911 .... making the 2011 the 100th Centennial Aniversary.
https://en.wikipedia.org/wiki/Chevrolet
.
Pro
Joined: Apr 2017
Posts: 681
Likes: 99
From: Cincinnati
Thanks. Its pretty easy to do, just need some vinyl, rubbing alcohol and a heat gun. I cut the vinyl into the shape of the emblem with about 2 inches of excess all around. Then heated it to form and tucked it then take a razor and cut the extra off by following the bottom edge of the emblem. Its nice also because if you mess up you can just peel it off and try again.
Team Owner
Joined: Apr 2005
Posts: 23,900
Likes: 218
From: Foxtrot Delta Tango