When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have to admit the Forgestars don't look that good. Is have some and like my grand sport wheels much better.
Forgestars are cheap though if you're on a budget then they're a good buy.
If not get something much nicer.
The nice thing about the Forgestar F14's is that you can get them in the stock 18/19 sizes with better offsets than the stock wheels. And of course they are reasonably priced at around $1600-1700 for an entire brand new set.
BRUSHED Finish with CLEAR POWDER COAT (IS NOT called "SILVER")
Below is the CF5V (on the BMW) and the CF 10 (Ten Spoke)
With After Market Custom ALLOY Wheels You Can Change The Offset Making them Closer To Flush with Outer Edge of Fender & Qtr Panel Giving Your Car a Better LOOK
Last edited by CamarosRus; 03-02-2019 at 04:57 PM.
Forgestar in Matte Black. Not sure where all the negativity comes from on Forgestar. You don't have to spend big $$$ to get a good product. I have not had any issues with the wheels. I will say that I do like the black wheels on my car with the carbon fiber accents but there are times the black wheels get lost in pictures. Not so much in person but in pictures if the sun isn't shining on them. I have considered a brushed aluminum tint coat to brighten the car up some but will stick with these for now. It is a tough choice but go with what you want not what others say.
Last edited by Whoop; 03-03-2019 at 11:29 AM.
Reason: Picture didn't upload correctly
Forgestar in Matte Black. Not sure where all the negativity comes from on Forgestar. You don't have to spend big $$$ to get a good product. I have not had any issues with the wheels. I will say that I do like the black wheels on my car with the carbon fiber accents but there are times the black wheels get lost in pictures. Not so much in person but in pictures if the sun isn't shining on them. I have considered a brushed aluminum tint coat to brighten the car up some but will stick with these for now. It is a tough choice but go with what you want not what others say.
You just can’t sweat the haters. Recently there was a guy totally ******* a set of $5000 wcc 3 piece wheels. Some people can’t be pleased with anything other than what they have. You know....living life with blinders on.
Not sure where all the negativity comes from on Forgestar.
Lighten up, Francis. Having an opinion or like for a style of aftermarket wheel is not a negative. Not everyone has to like what you like, last time I checked. It is what it is. Some of us don't like fat chicks either. Keep on cruiz'n.
Since you are picking out fugly wheels, you may as well get the fugly monster green to boot.
The guy wanted an opinion on color not your opinion on the wheels themselves and then you go telling another member you don't care. Have a drink and chill out Felicia.
I am not for sure going with an aftermarket wheel. I was just curious of what some you guys would choose. I also like the look of the factory wheels. I actually just pulled a photo off the net of a similar GS as I actually don’t have the car yet it should be in route soon. Here is an actual photo of the car. Also the white wheels would be ballsy lol
That looks amazing right there! Mine doesn’t have the GS fender stripes. Again good luck on your quest.🇺🇸
The guy wanted an opinion on color not your opinion on the wheels themselves and then you go telling another member you don't care. Have a drink and chill out Felicia.
it's so sweet of you to care that i don't care. let me know if you need help finding butt-hurt cream at your local drug store. i bet it even comes in fugly monster green.
I think i like the silver best on your car. I really like the bronze burst but can't picture how it would look on your car. Edit to say i'm not crazy about the stock wheels, think i like the Forgestars better.
it's so sweet of you to care that i don't care. let me know if you need help finding butt-hurt cream at your local drug store. i bet it even comes in fugly monster green.
My 2011 GS has a set of OEM Z06 'Spyder' wheels on it now, but for drag racing, I am thinking about installing a set of Forgestar F14 Drag wheels on the rear in the 17" x 11" size.
Then mount a set of Hoosier Drag Radials on them in the 315 x 35 / 17" size.
it's so sweet of you to care that i don't care. let me know if you need help finding butt-hurt cream at your local drug store. i bet it even comes in fugly monster green.
You probably know exactly where that stuff is, don't you?
Another vote for black here, or silver 2nd. As mentioned above, gray or gunmetal might seem monochromatic. Have to see it in person I guess.
The idea stated above of having a local powder coater do the wheels is also a good option. Forum vendor GetYourWheels can also offer a number of finishes beyond what Forgestar offers. I bought my custom finished Cray spiders through them in 2016 and had a good experience.
03-02-2019, 03:17 PM
