Coolant flush procedure
Thread Starter
5th Gear
Joined: Nov 2023
Posts: 5
Likes: 0
Coolant flush procedure
I’ve just got around to draining my coolant system and I found that the coolant is brown and the cap has sludge on it. I need to flush the system and I know GM has their own procedure to do so. I was wondering if anyone could point me in the direction of the procedure or inform me of the instructions to do so. I appreciate any and all help from anyone.
Drifting
Joined: Apr 2016
Posts: 1,286
Likes: 611
From: DFW Texas
I see you are new to the forum. You should check out the "How-Tos" section on the forum. Tons of DIY maintenance found here. Link below:
https://www.corvetteforum.com/how-tos/c/c6-37425
Also pulled the attached flush procedure from the above that should help you with your cooling system problem
GD
https://www.corvetteforum.com/how-tos/c/c6-37425
Also pulled the attached flush procedure from the above that should help you with your cooling system problem
GD
Burning Brakes
Joined: Dec 2004
Posts: 1,047
Likes: 207
From: Columbus Ohio
Super easy to flush out our cars coolant. Search through google or search my posts on the how to. Most difficult part was getting the coolant reservoir clean. I was just going to purchase a new one but they are expensive for what it is. I put nuts/bolts inside with dish soap to get most of it out as you can’t get a brush inside because of the chambers. I’m looking forward to swapping out my diff and tranny fluid this year.
