[Z06] C6 Front License Plate Bracket
#261
Le Mans Master
Thread Starter
Has anybody had any issues with the bottom part of the deformable bumper not being flat? The design of this part seems to require it to be relatively flat for the double sided tape to adhere. Before I stripped off the tape, I held it up against the bumper and it rocks back and forth. If you hold it all the way against on side, there's almost a 1/4-inch gap on the other side. If I push hard enough, it will flatten the bumper out. I just wonder how long the double sided tape will hold given the continuous force on it.
Thoughts?
Jim
Thoughts?
Jim
#262
Drifting
#263
Drifting
I have always been skeptical about the claims that this placement did not significantly raise temperatures so I did my own experiment. After all, if you take something the size of a license plate and stick it in your main air inlet, it only makes sense that it could raise temps if air flow was approaching a critical level.
Freeway driving, 65-70 mph, 80 degrees F, with the bracket, oil temp was running 167 degrees F. W/O the plate mounted, it stabilized at 165, so I have to agree, no significant temp increase under normal operating conditions at reasonable ambient temperatures. Obviously, extreme driving conditions could and probably would affect temps, but hey, that's why it's removable.
It may actually be an advantage to have the plate in the winter since it could help increase the oil temp faster, for those of you who actually drive these cars in the winter
Jim
#264
Le Mans Master
Thread Starter
Yes, that did work and it's holding nicely. I wedged a 2x4 under the plate to the floor to push it up for several hours and now it's holding well.
I have always been skeptical about the claims that this placement did not significantly raise temperatures so I did my own experiment. After all, if you take something the size of a license plate and stick it in your main air inlet, it only makes sense that it could raise temps if air flow was approaching a critical level.
Freeway driving, 65-70 mph, 80 degrees F, with the bracket, oil temp was running 167 degrees F. W/O the plate mounted, it stabilized at 165, so I have to agree, no significant temp increase under normal operating conditions at reasonable ambient temperatures. Obviously, extreme driving conditions could and probably would affect temps, but hey, that's why it's removable.
It may actually be an advantage to have the plate in the winter since it could help increase the oil temp faster, for those of you who actually drive these cars in the winter
Jim
I have always been skeptical about the claims that this placement did not significantly raise temperatures so I did my own experiment. After all, if you take something the size of a license plate and stick it in your main air inlet, it only makes sense that it could raise temps if air flow was approaching a critical level.
Freeway driving, 65-70 mph, 80 degrees F, with the bracket, oil temp was running 167 degrees F. W/O the plate mounted, it stabilized at 165, so I have to agree, no significant temp increase under normal operating conditions at reasonable ambient temperatures. Obviously, extreme driving conditions could and probably would affect temps, but hey, that's why it's removable.
It may actually be an advantage to have the plate in the winter since it could help increase the oil temp faster, for those of you who actually drive these cars in the winter
Jim
#265
Call me crazy, but I am not a big fan of the color-matched frame..
It seems to accentuate the existence of the license plate over the front fascia.
Are there any pics available with the bracket/plate only? A perfect example would be that combo on a LMB Z.
Thanks
Al
Are there any pics available with the bracket/plate only? A perfect example would be that combo on a LMB Z.
Thanks
Al
#266
Le Mans Master
Thread Starter
Without GM colered frame
With GM colored frame
#267
Le Mans Master
Peter, I was on your site. I see where I order the bracket for the Z06 and it shows the optional colour matched frame but where do I find the optional colour matched frame if I want to order and how much extra is the frame?
Edit...found it.. Thanks
Edit...found it.. Thanks
Last edited by Cdn Z06 Mike; 01-27-2010 at 10:24 AM.
#269
Le Mans Master
Thread Starter
I know this thread is some what long however, if you spend some time and read it you will find a number of people using our bracket that have posted here stating that they have seen no increase in engine temp because of the bracket, air flows around it
#270
Drifting
just got mine, installed in no time....... love the look....... way better
then alternatives.......... Dont know about running temps.... too new to tell.........
then alternatives.......... Dont know about running temps.... too new to tell.........
#271
Melting Slicks
I broke down and ordered one for my new Z. Hate the idea of running a front plate, but hate being pulled over more. A bit pricey though.
#272
Le Mans Master
Thread Starter
#274
Le Mans Master
Thread Starter
#275
Le Mans Master
Instead of reading 47 pages of info (sorry!), I thought I'd just ask the main questions I've got:
1. Does this bracket work for the Grand Sport/Z06?
2. Are the bracket and the color-matched frame 2 separate items?
3. It looks like the total for both frame and bracket (just the front) with shipping would be close to $250 - am I close?
4. Are there any discounts for ordering the bracket & frame together? Along with the rear plate frame?
Thanks!
1. Does this bracket work for the Grand Sport/Z06?
2. Are the bracket and the color-matched frame 2 separate items?
3. It looks like the total for both frame and bracket (just the front) with shipping would be close to $250 - am I close?
4. Are there any discounts for ordering the bracket & frame together? Along with the rear plate frame?
Thanks!
#277
Le Mans Master
Thread Starter
Instead of reading 47 pages of info (sorry!), I thought I'd just ask the main questions I've got:
1. Does this bracket work for the Grand Sport/Z06?
2. Are the bracket and the color-matched frame 2 separate items?
3. It looks like the total for both frame and bracket (just the front) with shipping would be close to $250 - am I close?
4. Are there any discounts for ordering the bracket & frame together? Along with the rear plate frame?
Thanks!
1. Does this bracket work for the Grand Sport/Z06?
2. Are the bracket and the color-matched frame 2 separate items?
3. It looks like the total for both frame and bracket (just the front) with shipping would be close to $250 - am I close?
4. Are there any discounts for ordering the bracket & frame together? Along with the rear plate frame?
Thanks!
2. yes, two seperate items.
3. Yes.
4, No, sorry
#278
Le Mans Master
Thread Starter
In Stock!
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
C6 Z06/ZR1 Removable Front License Plate Mounting Bracket
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA
All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.
C6 Z06/ZR1 Removable Front License Plate Mounting Bracket
#280
Le Mans Master
Thread Starter