[Z06] Texas Speed Rockers
12-22-2016, 12:30 PM
#1
Team Owner
Thread Starter
Texas Speed Rockers
http://www.lsxmag.com/features/pri-c...s-rocker-arms/
Haven't seen those talked about there. Hopefully ls7 application.
Also Lunati/Morel has some new different lifters out that look promising.
Haven't seen those talked about there. Hopefully ls7 application.
Also Lunati/Morel has some new different lifters out that look promising.
12-22-2016, 01:19 PM
#2
Team Owner
Interesting...makes sense I suppose. They have their own head castings, and of course sell assembled heads; but might as well start offering a complete top end package along roller rockers. 
12-22-2016, 01:22 PM
#3
Team Owner
Thread Starter
http://www.enginelabs.com/engine-tec...oller-lifters/
lunati lifters. These look promising. They are just private label morels.
lunati lifters. These look promising. They are just private label morels.
12-22-2016, 02:06 PM
#4
Le Mans Master
Seems lots of new rockers and stuff appearing. Too many choices. After 5 years mine are off to check and are just as new, so I don't have to make any decisions. Stick with what I got. LOL.
These texas speed ones look pretty nice. Could be one of the more reasonable LS7 options for sure.
These texas speed ones look pretty nice. Could be one of the more reasonable LS7 options for sure.
12-22-2016, 02:15 PM
#5
Team Owner
Thread Starter
Just nice to see more options coming out.
12-22-2016, 03:14 PM
#6
Le Mans Master
Nice, need to look into these, maybe sell my YT's that I haven't installed yet and buy these instead.
12-22-2016, 04:21 PM
#7
Team Owner
12-22-2016, 05:04 PM
#8
Le Mans Master
If TS wants to put their money where their mouth is, they need to spin-test a few combos so people wont be guessing..
That is the formula for success - create an innovative product, perform testing to prove it works and define the required supporting parts.
That is the formula for success - create an innovative product, perform testing to prove it works and define the required supporting parts.
Last edited by Dan_the_C5_Man; 12-22-2016 at 05:05 PM.
12-22-2016, 05:09 PM
#9
Le Mans Master
Few reasons:
1) Winter here now, was busy, didn't get the chance
2) Not widely accepted by the LS7 community
3) Not 100% confident, told my Mamo and YT that it will work with my combo (PRC 265 heads/dual spring with about 430lb open) Told by both my spring pressure is fine with the LS7 YT rocker part #
4) Time has passed, as another option, this may be better? .......and this is closer to an oem style
5) For longevity, prefer steel over alum.
1) Winter here now, was busy, didn't get the chance
2) Not widely accepted by the LS7 community
3) Not 100% confident, told my Mamo and YT that it will work with my combo (PRC 265 heads/dual spring with about 430lb open) Told by both my spring pressure is fine with the LS7 YT rocker part #
4) Time has passed, as another option, this may be better? .......and this is closer to an oem style
5) For longevity, prefer steel over alum.
12-23-2016, 08:40 AM
#10
Burning Brakes
Like the new Comp scroll pallet rocker, this one is for the LS3, not the LS7
12-23-2016, 09:05 AM
#11
Le Mans Master
12-23-2016, 10:36 AM
#13
Burning Brakes
12-23-2016, 10:39 AM
#14
Le Mans Master
12-23-2016, 11:10 AM
#15
Le Mans Master
still hoping - if the demand is there, it's possible.
12-23-2016, 12:29 PM
#17
Team Owner
Thread Starter
Those are just OEM ones with trunion kit installed. Nothing on their website yet.
12-24-2016, 04:30 AM
#18
Supporting Vendor
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,817
Received 1,012 Likes
on
533 Posts
Are the rockers in the OP post a rocker that is being currenlty sold?
If so has anyone seen them in person or know anyone who has run them?
If so how is the wipe pattern? Does TSP have a way to adjust the wipe pattern on these rocker such as YT does?
The look nice, would like alot more information!
http://www.americanheritageperformance.com/
If so has anyone seen them in person or know anyone who has run them?
If so how is the wipe pattern? Does TSP have a way to adjust the wipe pattern on these rocker such as YT does?
The look nice, would like alot more information!
http://www.americanheritageperformance.com/
Last edited by American Heritage; 12-24-2016 at 04:31 AM.
12-24-2016, 07:15 AM
#19
Team Owner
Thread Starter
They were shown at PRI. They are "coming soon" so that is all the info we have.
