Supercharger ordered!
Race Director
Joined: Jul 2000
Posts: 16,473
Likes: 2,370
From: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
2020 C7 of the Year Finalist -- Modified
2020 C6 of the Year Finalist - Modified
Cole - You will be very happy with the results. Looking forward to getting started on the install. I've been in contact with Ken daily. Karl's been on the road as you well know. I may or may not be able to tag along to Lake City to meet you.
Thread Starter
Racer
Joined: May 2008
Posts: 256
Likes: 0
From: Houston Texas
Former Vendor
Joined: Jul 2008
Posts: 4,327
Likes: 7
From: Oxnard SoCal www.aacorvette.com www.superchargersuperstore.com
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Race Director
Joined: Jul 2000
Posts: 16,473
Likes: 2,370
From: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
2020 C7 of the Year Finalist -- Modified
2020 C6 of the Year Finalist - Modified
Former Vendor
Joined: Jul 1999
Posts: 2,103
Likes: 0
From: Indianapolis Indiana
St. Jude Donor '11
Very cool SSGt USAF I have heard about this project through the grapevine and think I may end up in the mix here. Karl stopped by my shop yesterday for a bot BTW.
Whats up Tally and Motorhead
Mike Norris
I have heard about this project through the grapevine and think I may end up in the mix here. Karl stopped by my shop yesterday for a bot BTW.Whats up Tally and Motorhead
Mike Norris
Race Director
Joined: Jul 2000
Posts: 16,473
Likes: 2,370
From: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
2025 C8 Z06/7/E-Ray of the Year Finalist - Unmodified
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
2020 C7 of the Year Finalist -- Modified
2020 C6 of the Year Finalist - Modified
Safety Car
Joined: Sep 2007
Posts: 3,502
Likes: 82
Hi Mike,
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
Thread Starter
Racer
Joined: May 2008
Posts: 256
Likes: 0
From: Houston Texas
Hi Mike,
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
i've heard great things from the 3 cavemen
Thread Starter
Racer
Joined: May 2008
Posts: 256
Likes: 0
From: Houston Texas
be gentle its her first time
2005 Beast
Joined: Oct 2007
Posts: 2,586
Likes: 8
From: Tarpon Springs FL
Yes!
I'd like to tag along with this as I ordered and will be getting a Vortech installed to my vert this week at my Vette shop in Clearwater FL along with some black scorp wheels.
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
Thread Starter
Racer
Joined: May 2008
Posts: 256
Likes: 0
From: Houston Texas
I'd like to tag along with this as I ordered and will be getting a Vortech installed to my vert this week at my Vette shop in Clearwater FL along with some black scorp wheels.
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
sure man
need to find where all the vette guys around tampa have been hiding