Hey guys,

I just got off the phone with Rob @ Champion and we were talking about getting the 3in downpipes made for the c5/c6 TTIX cars. He was originally looking at getting these made later on in the year but I have convinced him to consider making a first batch earlier, as in being manufactured and delivered within a month-month and a half. For anyone with this kit, you can realize 60-85rwhp as the downpipe is the significant achilles heel on the kit. You can go back through the threads and see the dyno graphs for the upgrade...Lethal Performance TX and I hit 961/945 std rwhp/tq yesterday and I would have been well into the 1000's with the 3in downpipes, not to mention the trq gains throughout the powerband...

So, with that being said, Rob has left me to collect a group of individuals that want the upgrade and that will be committed to purchasing the kit. Pricing would become more aggressive in 5 set increments. Upfront, looking at pricing to be $1600 without the gb. The cost isn't in the piping or the materials, but the craftsmanship for the radius of the cutting, welding, the flange setup, and the curvature of the pipe in relationship to the wastegates.

1. 1badvr4
2.
3.
4.
5.
------discount
6.
7.
8.
9.
10.
------discount
11.
12.
13.
14.
15.
------discount

edit to reflect mfg pricing directives

 

Where are these getting made? Will these be able to utilize Evolution wastegates or will have to change to Delta wastegates? V-band bolt clamps or couplers? More information please.

 

Turbo Technology already has them made.

 

I dont want to speak on his behalf, but I spoke with george yesterday. he doesnt have them made, he has a car in his shop and said he has until april to make a set for that car. At that point he said he may or may not make his jigs and sell the dps then.

 

Hopefully rob will chime in, but I will forward this info to him directly.

 

I ordered a TTix kit in January and asked for the 3" downpipes. I just called today, and George told me it'll be "months" before the kit ships unless I want 2.5" downpipes. I'm waiting to see when my shortblock gets wrapped up, because I might just say screw it and take the 2.5" downpipes and buy the 3" ones when they're available. I have to weigh waiting longer for 3" from TTi, or paying a bunch to get them earlier from Champion. Blah.

 

No they haven't yet. At least not mass production.

 

Same configuration as tti 2.5" downpipe 5 bolt except in 3" diameter made with schedule 10 stainless steel.

 

Im sorry then. Last time i talked to george he said he was working on them and they shouldnt be too long. Deff didnt think monthes. From the way it seemed like it was only gonna be a week or two.

 

That was the original impression I got too. Oh well I guess.

 

As demand for 3" down pipes increases George will have move into production sooner, but if anyone wants a set we can build one set every two weeks. Please call or PM if you want to order.
Rob.

 

Pics?

I might be interested.

 

Rob,

Pm replied to. Gimme a call. Thanks buddy.

 

http://forums.corvetteforum.com/c6-f...e-upgrade.html

 

PM sent.

 

Thanks, received your payment and your first on the list.

 

Excited...Based on our convo, I think i'm gonna go for the gusto with 19psi. 1200rw here we come

Im either going to have a fast car or a box full of shrapnel

_________________
01 996tt-some mods
07 c6 z06 tt built 427 961/945 rw
05 cooper s-198fwhp
08 hayabusa-190rwhp 330mm 14 over
01 excursion-19in lift on 46s
05 srt10-698rwhp-sold
98 c5 vert-537/740spray rwhp Sold

 

For 1200rwhp @19psi you might need my new custom 64mm turbos.

 

Let's get that Z down to the Texas Mile and see what it will run.

 

pics of said pricey D/P?