E Force updates??
Thread Starter
Intermediate
Joined: Feb 2010
Posts: 45
Likes: 0
From: Oswego Illinois
E Force updates??
Getting ready to pull the trigger.....but before i do has anyone with this set up had any issues?? How is your stock clutch holding up? Any heat issues? Any oil leaks issues? Is it what you expected for the money you spent? I have a manual so Im real concerned about everytime I get on her she breaks loose (going with the 554 kit).
Thanks for any feed back from owners with this unit!!!!!!
Thanks for any feed back from owners with this unit!!!!!!
Heel & Toe
Joined: Nov 2011
Posts: 17
Likes: 0
From: Annawan Illinois
Getting ready to pull the trigger.....but before i do has anyone with this set up had any issues?? How is your stock clutch holding up? Any heat issues? Any oil leaks issues? Is it what you expected for the money you spent? I have a manual so Im real concerned about everytime I get on her she breaks loose (going with the 554 kit).
Thanks for any feed back from owners with this unit!!!!!!
Thanks for any feed back from owners with this unit!!!!!!
Coltsfan,
Where you getting this done. Not to far away from me and I'm having a hard time finding a shop to do tuning / performance installs.
Thanks,
CP
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
My car is an auto so I can't speak about the manual issues, but as far as the eforce, it has delivered more than I expected and I'm happy with it. Outside of a defective part, which edelbrock took good care of I have no issues at all. Yes, you will break the tires loose when you get on it, but that's half the fun.
Team Owner
Joined: Sep 1999
Posts: 41,732
Likes: 1,718
From: Springfield MO
Getting ready to pull the trigger.....but before i do has anyone with this set up had any issues?? How is your stock clutch holding up? Any heat issues? Any oil leaks issues? Is it what you expected for the money you spent? I have a manual so Im real concerned about everytime I get on her she breaks loose (going with the 554 kit).
Thanks for any feed back from owners with this unit!!!!!!
Thanks for any feed back from owners with this unit!!!!!!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Mar 2007
Posts: 11,331
Likes: 18
From: Missouri City Texas
Getting ready to pull the trigger.....but before i do has anyone with this set up had any issues?? How is your stock clutch holding up? Any heat issues? Any oil leaks issues? Is it what you expected for the money you spent? I have a manual so Im real concerned about everytime I get on her she breaks loose (going with the 554 kit).
Thanks for any feed back from owners with this unit!!!!!!
Thanks for any feed back from owners with this unit!!!!!!
I recommend the Khumo XS, Bridgestone RE-11, Ventus R-S3 or Nitto NT05. All are very good and very sticky street radials.
Former Vendor
Joined: May 2005
Posts: 3,749
Likes: 4
From: Valencia Ca
We are installing yet another one this week and I'll post up the results. Great systems - you'll like it.
Getting ready to pull the trigger.....but before i do has anyone with this set up had any issues?? How is your stock clutch holding up? Any heat issues? Any oil leaks issues? Is it what you expected for the money you spent? I have a manual so Im real concerned about everytime I get on her she breaks loose (going with the 554 kit).
Thanks for any feed back from owners with this unit!!!!!!
Thanks for any feed back from owners with this unit!!!!!!
Supporting Vendor
Joined: Nov 2010
Posts: 3,893
Likes: 652
From: Houston, TX
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
Safety Car
Joined: Sep 2007
Posts: 3,502
Likes: 82
Racer
Joined: Apr 2009
Posts: 471
Likes: 1
From: Gander NEWFOUNDLAND
I do, just finished installing one on a 2007 z06 .
1. make sure ECU has latest update 12614676 .when you update you may also have to reprogram the crankshaft position sensor.
2 If you doing it yourself go buy a 10mm universal 1/4 drive socket.and fuel line tool.
3 if it's a Z06 remove steering rack to passenger side 'NOT' drivers side.
4 when car is finished it should sound JUST LIKE IT DID BEFORE SUPERCHARGER WAS INSTALLED.
If you need any more info just email me.
1. make sure ECU has latest update 12614676 .when you update you may also have to reprogram the crankshaft position sensor.
2 If you doing it yourself go buy a 10mm universal 1/4 drive socket.and fuel line tool.
3 if it's a Z06 remove steering rack to passenger side 'NOT' drivers side.
4 when car is finished it should sound JUST LIKE IT DID BEFORE SUPERCHARGER WAS INSTALLED.
If you need any more info just email me.
Le Mans Master
Joined: Apr 2011
Posts: 7,821
Likes: 412
From: Montreal
St. Jude Donor '13
My 07 doesn't have any issues to speak of. I know Elmer does but I don't think that issue is too common. On a Z06, or manual car make sure you remove the alternator pulley bolt and retorque it using locktight. I have a few friends who's pulley spun off.
Le Mans Master
Joined: Oct 2009
Posts: 5,000
Likes: 2,261
Also MINOR ISSUE: Original kit I installed provided new brackets for the original horns and the sound result were quite embarrassing (think bip bip cartoon character..). There is a good work around suggestion on this forum.
Maybe E-force fixed it by now...
Maybe E-force fixed it by now...
Advanced
Joined: Dec 2011
Posts: 75
Likes: 1
I am looking to buy one, e force 599 for a 06 A6 base coupe.
I am in Afghanistan and would like to buy and have it installed for when I come back.
Any leads in the Miami area?
I could install also so if I get a good deal.
Thanks
Frank
Forgot to ask if the 07 issues apply to 06 as well?
Thanks again
I am in Afghanistan and would like to buy and have it installed for when I come back.
Any leads in the Miami area?
I could install also so if I get a good deal.
Thanks
Frank
Forgot to ask if the 07 issues apply to 06 as well?
Thanks again
Last edited by Frankko; Feb 7, 2012 at 06:57 AM. Reason: Added question
Drifting
Joined: Feb 2012
Posts: 1,796
Likes: 37
From: skiatook oklahoma
Some notes...
599hp kit (#1591 like mine) will cost some extra due to fuel pump.
installation for fuel pump on automactics require dropping drive train and maybe exhaust which will cost extra. pump installation write-up....
http://forums.corvetteforum.com/c6-t...fuel-pump.html
reinstallation of horn is still incorrect, they stopped sending a new horn bracket but still gets attached to firmly. which causes horn to still go weeeeep weeeeeep. see topic and fix...
http://forums.corvetteforum.com/c6-f...install-3.html
edelbrock remove/install using latest document for 1590/1591/1592...
remove old bracket step 120.
attached horn step 127.
http://www.edelbrock.com/automotive_.../1000/1590.pdf
some use 345/30/19 instead of 325/30/19 tires on rear. if you do and have "Engine drag Control ", size fronts to 1.1 inches of OD of back tires. i filled out the 3rd party limited warrenty and it states oversized tires limits/voids warrenty, just a f.y.i.
see... http://forums.corvetteforum.com/c6-z...this-mean.html
those are the notes i printed and saved before i had mine installed a couple weeks ago.
599hp kit (#1591 like mine) will cost some extra due to fuel pump.
installation for fuel pump on automactics require dropping drive train and maybe exhaust which will cost extra. pump installation write-up....
http://forums.corvetteforum.com/c6-t...fuel-pump.html
reinstallation of horn is still incorrect, they stopped sending a new horn bracket but still gets attached to firmly. which causes horn to still go weeeeep weeeeeep. see topic and fix...
http://forums.corvetteforum.com/c6-f...install-3.html
edelbrock remove/install using latest document for 1590/1591/1592...
remove old bracket step 120.
attached horn step 127.
http://www.edelbrock.com/automotive_.../1000/1590.pdf
some use 345/30/19 instead of 325/30/19 tires on rear. if you do and have "Engine drag Control ", size fronts to 1.1 inches of OD of back tires. i filled out the 3rd party limited warrenty and it states oversized tires limits/voids warrenty, just a f.y.i.
see... http://forums.corvetteforum.com/c6-z...this-mean.html
those are the notes i printed and saved before i had mine installed a couple weeks ago.
