lme have just released a new manifold that fits under a c6 bonnet n looks ****
Sheet metal intake for boost!
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
Sheet metal intake for boost!
Hello
It's a c6Z, lsx427ci and prc285 heads, APS kit with twin 67/66's by DKT.
Currently using my stock ls7 intake and throttle body.
I want to Max out my turbos, I know that the stock intake will be my limit at 20psi+
I need your input/recommendation for a good sheet metal intake that will be an asset for my build. Not just a boost holder 😎
The precission metal craft sheet metal intake price is nice
Was wondering if they are good for my application or if there are better options out there!
Thank you
It's a c6Z, lsx427ci and prc285 heads, APS kit with twin 67/66's by DKT.
Currently using my stock ls7 intake and throttle body.
I want to Max out my turbos, I know that the stock intake will be my limit at 20psi+
I need your input/recommendation for a good sheet metal intake that will be an asset for my build. Not just a boost holder 😎
The precission metal craft sheet metal intake price is nice
Was wondering if they are good for my application or if there are better options out there!
Thank you
Last edited by z0vette; Apr 8, 2014 at 09:28 AM.
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Jan 2010
Posts: 166
Likes: 1
Team Owner
Joined: Nov 2007
Posts: 24,035
Likes: 2,342
From: Gilbert AZ
The one PMC intake I saw gained ~50hp at 6k+ but gave up a ton of low end. For a car revving 6-8k it would be nice gains but on a street car it killed the torque and power <5k. I think that will be the case for all of the sheet intakes.
