When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nitrous guys let's see some pics where did you put your purge
Also how did you get nitrous line in engine bay threw fire wall or other ?
If you look right under the passenger wiper arm at the bend I drilled a hole and used a dodge window washer jet, drilled it out, but it is a threaded stud and nut to bolt on the c6 cowling. ran a rubber line from purge across engine to it, with it being rubber I am able to purge and no purge cloud,I ran the line in the car threw the rubber grommet in the passenger side firewall.
Looks good no problems with getting it in threw firewall I just don't want any moisture to come in after doin that
you can seal it up with marine goop or permatex seamsealer silicone caulk or just a good gromet and seal both sides tape a nice area and on the line seal and remove tape, will look factory
Nitrous
