C6 Forced Induction/Nitrous C6 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

stock ls2 with ECS and 100 shot wet.

Thread Tools
 
Search this Thread
 
Old 02-03-2015, 08:25 AM
  #1  
615C6
Racer
Thread Starter
 
615C6's Avatar
 
Member Since: Dec 2013
Location: RACELAND LA
Posts: 258
Received 2 Likes on 2 Posts
Default stock ls2 with ECS and 100 shot wet.

Im going with a ECS 1500 supercharger kit. I been running a 100hp wet nitrous set up and was wandering if I should just remove it or continue to keep running it at times. The motor is all stock. Anyone know if it will last or if this could even be tune to run correctly? Thanks
Old 02-03-2015, 09:00 AM
  #2  
DOUG @ ECS
Premium Supporting Vendor
 
DOUG @ ECS's Avatar
 
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,319
Received 1,086 Likes on 657 Posts

Default

Sure that can be tuned in correctly, nitrous is a great intercooler in the hot weather, but you must have proper octane for whatever power range you are looking to be in.
Old 02-03-2015, 02:47 PM
  #3  
ATLS2
Racer
 
ATLS2's Avatar
 
Member Since: Jul 2012
Posts: 498
Received 2 Likes on 2 Posts
Default

My goal is to run a 100 shot on an un restricted East Coast kit. I have a ls2 but will be upgrading the internals so I can push the envelope. With the methanol in the mix what do you think will be the total horsepower?
Old 02-03-2015, 04:45 PM
  #4  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes on 1,053 Posts
St. Jude Donor '15

Default

Way too many variables to answer that.

What are you planning on internals wise?
Old 02-03-2015, 06:08 PM
  #5  
ATLS2
Racer
 
ATLS2's Avatar
 
Member Since: Jul 2012
Posts: 498
Received 2 Likes on 2 Posts
Default

Nothing top shelf, need to keep it under 10 installed.
Old 02-03-2015, 08:00 PM
  #6  
winters97gt
Le Mans Master
 
winters97gt's Avatar
 
Member Since: Dec 2007
Location: Somewhere in the Mid 9's TX
Posts: 8,291
Received 77 Likes on 65 Posts

Default

I made 850/800 on a fully maxed out ECS Novi 1500 kit on a 402 on pump/meth. I'm not sure that blower has any left in it besides maybe 20-30hp on something like Shell URT 110. With a 100 shot, it made a bit more. Yes, you can do both.

My fastest pass was 149.x OFF the bottle
My fastest pass was 148.x ON the bottle
Go figure...




Old 02-03-2015, 09:04 PM
  #7  
gotjuice?
Le Mans Master
Support Corvetteforum!
 
gotjuice?'s Avatar
 
Member Since: Aug 2004
Location: NCM Lifetime#2195 Bulverde, Texas 78163
Posts: 5,946
Received 38 Likes on 35 Posts
St. Jude Donor '13

Default

I run a 100 shot on mine, YSI and meth. But it is a built engine.
Old 02-04-2015, 09:23 AM
  #8  
DOUG @ ECS
Premium Supporting Vendor
 
DOUG @ ECS's Avatar
 
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,319
Received 1,086 Likes on 657 Posts

Default

Originally Posted by ATLS2
My goal is to run a 100 shot on an un restricted East Coast kit. I have a ls2 but will be upgrading the internals so I can push the envelope. With the methanol in the mix what do you think will be the total horsepower?
Assuming you will be adding blower cam you should be in the 850-900 rwhp area with the 100 shot. Just as a guess.
Old 02-04-2015, 10:56 AM
  #9  
veneno
Racer
 
veneno's Avatar
 
Member Since: Sep 2013
Location: coconut creek, fl
Posts: 469
Likes: 0
Received 61 Likes on 45 Posts
Default

Be prepared for a rebuild if you spray 100 shot and boost on a stock motor I can't see the rings lasting after a few 1/4 mile passes
Old 02-04-2015, 11:30 AM
  #10  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes on 1,053 Posts
St. Jude Donor '15

Default

Originally Posted by veneno
Be prepared for a rebuild if you spray 100 shot and boost on a stock motor I can't see the rings lasting after a few 1/4 mile passes
BUT I SAW IT ON YOUTUBE!!1!

They said it would be fine

Old 02-04-2015, 11:55 AM
  #11  
nareg
Racer
 
nareg's Avatar
 
Member Since: Mar 2011
Location: Houston Tx
Posts: 282
Received 8 Likes on 7 Posts

Default

Originally Posted by schpenxel
but i saw it on youtube!!1!

They said it would be fine

lol
Old 02-04-2015, 11:57 AM
  #12  
DOUG @ ECS
Premium Supporting Vendor
 
DOUG @ ECS's Avatar
 
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,319
Received 1,086 Likes on 657 Posts

Default

Originally Posted by veneno
Be prepared for a rebuild if you spray 100 shot and boost on a stock motor I can't see the rings lasting after a few 1/4 mile passes

We have stock engines SC/NOS making 900+ for a few years now, raced often. It is well understood going into it what can happen though, but it's amazing how well they can hold up.
Old 02-04-2015, 12:21 PM
  #13  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes on 1,053 Posts
St. Jude Donor '15

Default

Originally Posted by DOUG @ ECS
We have stock engines SC/NOS making 900+ for a few years now, raced often. It is well understood going into it what can happen though, but it's amazing how well they can hold up.
Geez. That is nuts!
Old 03-14-2016, 09:42 PM
  #14  
vettandtyphoon1
Burning Brakes
 
vettandtyphoon1's Avatar
 
Member Since: Aug 2004
Location: st. anne illinois
Posts: 956
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by DOUG @ ECS
We have stock engines SC/NOS making 900+ for a few years now, raced often. It is well understood going into it what can happen though, but it's amazing how well they can hold up.
Doug

This is what I'm looking to do now
Cam converter and nitrous. I'll need to get parts from you soon!

Get notified of new replies

To stock ls2 with ECS and 100 shot wet.




Quick Reply: stock ls2 with ECS and 100 shot wet.



All times are GMT -4. The time now is 06:01 PM.