Question on PCV LS3 setup
Thread Starter
Racer
Joined: Oct 2008
Posts: 349
Likes: 18
From: SoCal
Question on PCV LS3 setup
I bought a long block that had no covers at all to swap into my C5Z and am trying to line out the rest of the little details.
Can I reuse my LS6 valley cover on my LS3? I ordered tall holley valce covers that have PCV nipples on both sides, and was gonna run the valley cover, and both valve covers into a catch can and not deal with the headaches of figuring out a looped system.
Setup will be a high boost YSI fed system, stock LS3 heads and intake. short block is all forged and built for boost. Ive never dealt with a Gen 4 motor and am just in the dark a little bit.
Can I reuse my LS6 valley cover on my LS3? I ordered tall holley valce covers that have PCV nipples on both sides, and was gonna run the valley cover, and both valve covers into a catch can and not deal with the headaches of figuring out a looped system.
Setup will be a high boost YSI fed system, stock LS3 heads and intake. short block is all forged and built for boost. Ive never dealt with a Gen 4 motor and am just in the dark a little bit.
