Notices
C6 Parts for Sale/Wanted C6 Corvette Performance Parts, OEM, Aftermarket, Superchargers, Turbo Kits, Wheels & Tires, Exterior Enhancements

C6 Partition and Trunk Organizer(Finally)

Thread Tools
 
Search this Thread
 
Old 07-17-2006, 02:43 PM
  #21  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by hdfatboy

The only way to do that is make it out of plastic or something that can have bends. The partition needs to be at an angle to accomodate the roof when stowed. If we were to make it out of MDF board (like we are today) it would be heavier than I would like and if made out of plastic you loose some of the rigidity and acoustic properties.

So short answer is no, we have not come up with a feasible way to make a partition that will alllow for roof storage.

The solution we offer is really not that bad as the partition lifts right out and lay's in the trunk when the roof is in the stow position.

Give it a try and if you do not like it, ship it back for a refund.

See ya,

Jim
Old 07-23-2006, 11:06 PM
  #22  
hawaiianswiss
Racer
 
hawaiianswiss's Avatar
 
Member Since: Nov 2004
Location: Switzerland
Posts: 332
Likes: 0
Received 0 Likes on 0 Posts
Default

Will this fit the C6 Z06 too?

Thanks!
Old 07-24-2006, 12:00 AM
  #23  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by hawaiianswiss
Will this fit the C6 Z06 too?

Thanks!

Sure will.....

Jim
Old 07-24-2006, 01:38 AM
  #24  
Mystical Musician
Racer
 
Mystical Musician's Avatar
 
Member Since: Apr 2006
Location: College Park Maryland
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by southerncarparts
So short answer is no, we have not come up with a feasible way to make a partition that will alllow for roof storage.
When you do come up with a way, you'll have my business. I'm sure a lot of other people will also jump on the band wagon. I know you guys can do it, you WILL!
Old 08-04-2006, 12:50 PM
  #25  
PillRoller
Racer
 
PillRoller's Avatar
 
Member Since: Jun 2006
Location: Dewey OK
Posts: 326
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by RD in SD
Do you offer anything that goes all the way to the top to keep it quiet inside like a convertible. When you seal off that rear area you loose the drone from the back tires. Makes a big difference. I have a brand new 06 and I will be your ginney pig if you want to make one.
That sounds like a great idea, but how will you see to back up? That would scare me not being able to see behind me.
Old 08-04-2006, 01:16 PM
  #26  
PillRoller
Racer
 
PillRoller's Avatar
 
Member Since: Jun 2006
Location: Dewey OK
Posts: 326
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by southerncarparts
The only way to do that is make it out of plastic or something that can have bends. The partition needs to be at an angle to accomodate the roof when stowed. If we were to make it out of MDF board (like we are today) it would be heavier than I would like and if made out of plastic you loose some of the rigidity and acoustic properties.

So short answer is no, we have not come up with a feasible way to make a partition that will alllow for roof storage.

The solution we offer is really not that bad as the partition lifts right out and lay's in the trunk when the roof is in the stow position.

Give it a try and if you do not like it, ship it back for a refund.

See ya,

Jim
Jim and all, I have one of the partitions without the storage containers. I can put my top in the back and the partition bends gently to match the curvature of the top. No problem. I doubt if it will work with storage container option though. I'm glad I got the one I did!
Old 08-18-2006, 07:13 PM
  #27  
Keith N
Safety Car
 
Keith N's Avatar
 
Member Since: Jul 2006
Location: Southern California
Posts: 4,725
Received 7 Likes on 7 Posts

Default

Jim,

Any pics without the tray option? Please post.
Old 09-03-2006, 10:31 PM
  #28  
siffert
Safety Car
 
siffert's Avatar
 
Member Since: Aug 2006
Location: Makena, Maui & NM
Posts: 4,206
Likes: 0
Received 5 Likes on 4 Posts

Default

Hi...I noticed you sell a lot of neat C6 items. I, and many others are looking for clear lense replacements for the side front amber lenses and rear red lenses. Any possiblities from SouthernCarParts for this?
Old 09-04-2006, 09:30 AM
  #29  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by siffert
Hi...I noticed you sell a lot of neat C6 items. I, and many others are looking for clear lense replacements for the side front amber lenses and rear red lenses. Any possiblities from SouthernCarParts for this?
Sorry! Don't have those available right now.

Adding new products every day so be sure to check back with us to see what's new!



Jim
Old 10-23-2006, 09:06 PM
  #30  
vette05
Burning Brakes
 
vette05's Avatar
 
Member Since: Sep 2004
Location: Jacksonville North Carolina
Posts: 853
Likes: 0
Received 1 Like on 1 Post

Default

Got my partition today. Goes great with the Vettetray cargo organizer that I purchased from you last year. The partition actually helps reduce the interior noise that radiates from the rear and doesn't block the rear speakers. Looks great and fits like a glove. Keep up the good work!
Old 10-24-2006, 04:56 PM
  #31  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by vette05
Got my partition today. Goes great with the Vettetray cargo organizer that I purchased from you last year. The partition actually helps reduce the interior noise that radiates from the rear and doesn't block the rear speakers. Looks great and fits like a glove. Keep up the good work!
Glad you like it.....

Thanks for posting!

Jim
Old 10-25-2006, 08:35 PM
  #32  
smokin vette
Racer
 
smokin vette's Avatar
 
Member Since: Sep 2006
Location: Fountain Valley CA
Posts: 266
Likes: 0
Received 1 Like on 1 Post
Default

I came across an organizer for c6 on ebay... and was thinking how could someone stick something like that in their car. This on the other hand is a great looking organizer... if I didn't just place a custom speaker box where this goes I would pick one up my self!
Old 10-25-2006, 10:27 PM
  #33  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by smokinvette.com
I came across an organizer for c6 on ebay... and was thinking how could someone stick something like that in their car. This on the other hand is a great looking organizer... if I didn't just place a custom speaker box where this goes I would pick one up my self!
Thanks!

We have a lot of these out there now.

They work great

Jim
Old 01-01-2007, 06:01 PM
  #34  
REACTOR111
Instructor
 
REACTOR111's Avatar
 
Member Since: May 2006
Location: Stanley NC
Posts: 227
Received 145 Likes on 59 Posts

Default

Can you get the C6 Z06 emblem instead of the flags? Thanks
Old 01-01-2007, 07:26 PM
  #35  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by REACTOR111
Can you get the C6 Z06 emblem instead of the flags? Thanks
I am sure I could....let me see if I can get some of the emblems and I will add that as an option on the site.

Thanks,

Jim
Old 01-03-2007, 09:56 AM
  #36  
SuperSportII
Intermediate
 
SuperSportII's Avatar
 
Member Since: Dec 2006
Location: Ringgold GA
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default Emblem on both sides of the partition

Jim, Is an emblem on both sides of the partition an option. That would allow the emblem to be viewed on the truck side (without the purchase of the LLoyds cargo mat) and on the passenger side (without the need for emblem placement on the storage compartment)? Basically, it allows another option.

Thanks,

SupersportII
Old 01-03-2007, 12:05 PM
  #37  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by SuperSportII
Jim, Is an emblem on both sides of the partition an option. That would allow the emblem to be viewed on the truck side (without the purchase of the LLoyds cargo mat) and on the passenger side (without the need for emblem placement on the storage compartment)? Basically, it allows another option.

Thanks,

SupersportII
It is not an option on the site, but I can certainly do that for you for an extra $35 bucks..I you want it, place the order and order the one emblem and then in the comments say that you want an emblem on both sides. You can then just expect that whatever your total is will be increased by $35 bucks when I run your CC.....

Thanks,

Jim

Get notified of new replies

To C6 Partition and Trunk Organizer(Finally)

Old 01-17-2007, 05:09 PM
  #38  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Here are some pics with the Z06 emblem....






Still have free shipping....C6 Crossed flags also available as an emblem.

Thanks,

Jim
Old 01-17-2007, 10:27 PM
  #39  
fright88
Safety Car
 
fright88's Avatar
 
Member Since: Jan 2006
Location: Littleton CO
Posts: 3,713
Likes: 0
Received 0 Likes on 0 Posts
Default

Can someone by chance measure the space between the partition and the back of the car? I am wondering if my Wheelchair will still fit in if I get a partition. Thanks for any help.
Old 01-17-2007, 11:49 PM
  #40  
southerncarparts
Supporting Vendor
Thread Starter
 
southerncarparts's Avatar
 
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes on 288 Posts
St. Jude Donor '06-'07, '13, '15

Default

Originally Posted by fright88
Can someone by chance measure the space between the partition and the back of the car? I am wondering if my Wheelchair will still fit in if I get a partition. Thanks for any help.
It fits direcly in front of the targa top holding brackets. Hopefully that will help. If the chair sits behind the targa brackets then you will not have any problems.

Thanks,

Jim


Quick Reply: C6 Partition and Trunk Organizer(Finally)



All times are GMT -4. The time now is 10:19 PM.