1-4 Skip Shift Eliminator
08-19-2006, 08:36 AM
#1
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
1-4 Skip Shift Eliminator
Now at Southern Car Parts....
Do you hate the 1-4 skip shift installed on the C6 Manual Transmission? This little device will elimate that annoying issue.
This kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 6-speed gearbox. This kit uses genuine Delphi Packard Electric Systems division connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use on both the standard MN6 Corvette's 6-speed gearbox and also the M12 Z06 Corvette's 6-speed gearbox. No permanent modifications are required to install this product.
Takes 5 mins to install and is easily reversable.
Each Kit comes with complete installtion instructions.
NOTE: This kit will prevent the CAGS solenoid from engaging but the "1 to 4" light on the dash will still illuminate when skip shift conditions are met.
Click here to purchase....
Corvette Skip Shift Eliminator
Do you hate the 1-4 skip shift installed on the C6 Manual Transmission? This little device will elimate that annoying issue.
This kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 6-speed gearbox. This kit uses genuine Delphi Packard Electric Systems division connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use on both the standard MN6 Corvette's 6-speed gearbox and also the M12 Z06 Corvette's 6-speed gearbox. No permanent modifications are required to install this product.
Takes 5 mins to install and is easily reversable.
Each Kit comes with complete installtion instructions.
NOTE: This kit will prevent the CAGS solenoid from engaging but the "1 to 4" light on the dash will still illuminate when skip shift conditions are met.
Click here to purchase....
Corvette Skip Shift Eliminator
__________________
Last edited by southerncarparts; 08-16-2011 at 10:00 PM.
08-26-2006, 12:03 PM
#5
Le Mans Master
It will be the first item I order after I get my C6 
I've got one on my '04 Z and wouldn't be without one.
I've got one on my '04 Z and wouldn't be without one.
08-28-2006, 03:39 PM
#6
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by Mr. Wonderful
It will be the first item I order after I get my C6
I've got one on my '04 Z and wouldn't be without one.
I've got one on my '04 Z and wouldn't be without one.
We have them in stock and ready to ship.
Jim
08-29-2006, 08:27 PM
#10
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by Operations
Placed order today
We appreciate the business!
Jim
10-01-2006, 06:45 PM
#12
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by EDMGUY
Just install mine this weekend and love it. Its soooooo nice shifting in all gears and not being force into 4th gear.
Thanks for the business
Jim
10-04-2006, 03:22 PM
#13
It only took 30 minutes of Corvette ownership to realize I needed this device! Nothing like turning onto a steep hill and having the car try to go into 4th gear and bog down. I'll be installing this mod within minutes of its arrival here.
Thanks for the quick turnaround on my order.
Thanks for the quick turnaround on my order.
10-04-2006, 09:16 PM
#14
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by DZeckhausen
It only took 30 minutes of Corvette ownership to realize I needed this device! Nothing like turning onto a steep hill and having the car try to go into 4th gear and bog down. I'll be installing this mod within minutes of its arrival here.
Thanks for the quick turnaround on my order.
Thanks for the quick turnaround on my order.
Should be there shortly
10-06-2006, 10:45 AM
#16
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by 07blkvette
placed order today.
Going out this morning.
We appreciate it!
In stock and Ready to ship... order today, ship today
Jim
10-11-2006, 07:35 AM
#17
Mine arrived yesterday. I backed the car (2007 C6 Coupe) onto a pair of Rhino Ramps, chocked a front wheel, and wedged a jackstand under the rear suspension crossmember for safety backup. (You never know if a Rhino Ramp is defective and might collapse without warning! Not worth gambling my life on it.) Then I rolled under the car on my Griot's Garage creeper and installed the parts and tie-wrapped the harness in about 2 minutes. Very easy modification. Installation complete and the car back on the ground less than 15 minutes after I fished the package out of my mailbox!
Now I can drive the C6 sedately (if I wish) without fear of bogging down as the car tries to shift into 4th gear at the most inopportune moments.
Thanks for making this product available and for your rapid mailing. $20 well spent.
Now I can drive the C6 sedately (if I wish) without fear of bogging down as the car tries to shift into 4th gear at the most inopportune moments.
Thanks for making this product available and for your rapid mailing. $20 well spent.
10-12-2006, 09:58 AM
#18
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by DZeckhausen
Mine arrived yesterday. I backed the car (2007 C6 Coupe) onto a pair of Rhino Ramps, chocked a front wheel, and wedged a jackstand under the rear suspension crossmember for safety backup. (You never know if a Rhino Ramp is defective and might collapse without warning! Not worth gambling my life on it.) Then I rolled under the car on my Griot's Garage creeper and installed the parts and tie-wrapped the harness in about 2 minutes. Very easy modification. Installation complete and the car back on the ground less than 15 minutes after I fished the package out of my mailbox!
Now I can drive the C6 sedately (if I wish) without fear of bogging down as the car tries to shift into 4th gear at the most inopportune moments.
Thanks for making this product available and for your rapid mailing. $20 well spent.
Now I can drive the C6 sedately (if I wish) without fear of bogging down as the car tries to shift into 4th gear at the most inopportune moments.
Thanks for making this product available and for your rapid mailing. $20 well spent.
We appreciate the business and the kind feedback
Enjoy!
Jim
