Group Buy~! Carbon Fiber ZR1 Front Splitter, ZR1 Side skirts and Spoiler!
06-25-2011, 09:13 PM
#81
I sent an email to this address and it bounced. I went to your web page and used the address listed there and have not received an invoice yet.
06-26-2011, 07:19 PM
#82
Platinum Supporting Vendor
Thread Starter
.Let us know how we can help
06-26-2011, 07:24 PM
#83
Platinum Supporting Vendor
Thread Starter
. We would be more than happy to install the parts but we are located in Baja California MX.
06-26-2011, 07:27 PM
#84
Platinum Supporting Vendor
Thread Starter
My front splitter arrived today, quite the packaging job lol, took me awhile to get it unwrapped.................Shipping was quick from the left coast, showed up fedex
it looks very nice, I am "very" picky with things, it has some minor imperfections in the clear coat (a small bubble here or there) but nothing thats visable more than a foot away from your face and certainly nothing that will be visable on the car..............
the best part is that its "HUNDREDS" less than other vendors, hell this splitter in carbon is cheaper than some vendors charge for flat black!
I will try and install it in the next few days when I have some free time and will post up pics!
it looks very nice, I am "very" picky with things, it has some minor imperfections in the clear coat (a small bubble here or there) but nothing thats visable more than a foot away from your face and certainly nothing that will be visable on the car..............
the best part is that its "HUNDREDS" less than other vendors, hell this splitter in carbon is cheaper than some vendors charge for flat black!
I will try and install it in the next few days when I have some free time and will post up pics!
.Everyone who likes carbon.. Sneak peak of more carbon fibre parts..
06-27-2011, 04:16 PM
#85
Burning Brakes
Easy bolt on install, fits perfect, finish is about an 8.75 out of 10 (I am very picky)...........
I have never seen any other aftermarket splitter to compare it however
Price is outstanding compared to competitors, shipping was quick, delivery was without incident
Would purchase again!
Not the best pics, I did drive the car before the pics, I hit it up real quick with some detailing spray so its not as clean as it could be..............
Now if I can keep my driveway from taking a bite out of it!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I have never seen any other aftermarket splitter to compare it however
Price is outstanding compared to competitors, shipping was quick, delivery was without incident
Would purchase again!
Not the best pics, I did drive the car before the pics, I hit it up real quick with some detailing spray so its not as clean as it could be..............
Now if I can keep my driveway from taking a bite out of it!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by 9c1ny; 06-27-2011 at 04:20 PM.
06-27-2011, 06:54 PM
#88
Platinum Supporting Vendor
Thread Starter
Your vette looks great! 
Also if anyone else is interested in more carbon for there car, we are launching our new CF body parts for the corvette. We can redo your complete corvette in carbon fiber!
Also if anyone else is interested in more carbon for there car, we are launching our new CF body parts for the corvette. We can redo your complete corvette in carbon fiber!
06-28-2011, 12:05 AM
#89
Team Owner
Some great deals. I really want to jump in on this.
06-28-2011, 01:03 AM
#90
Instructor
how does the third brake light mount into the spoiler? Im really interested in getting one but wanted to ask before ordering. What is the current timing between ordering and shipping right now?
06-28-2011, 11:59 AM
#91
Heel & Toe
Member Since: May 2009
Location: Helotes Texas
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Put me down for a complete ZR1 Carbon Fiber set to fit a 2011 Grand Sport Convertible.
ZR1 CF Side Skirts $550
ZR1 CF Splitter $469
ZR1 CF Spoiler $349
Total is $1368 Shipped? Invoiced from Paypal?
ZR1 CF Side Skirts $550
ZR1 CF Splitter $469
ZR1 CF Spoiler $349
Total is $1368 Shipped? Invoiced from Paypal?
06-28-2011, 12:47 PM
#92
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,166
Received 8,997 Likes
on
5,365 Posts
Check my thread in C6 Tech on attaching the side skirts http://forums.corvetteforum.com/c6-t...on-08-z06.html . The job isn't hard at all. There are some points during the install where a second pair of hands would help but you can get around that with some duct tape.
Bill
Bill
06-28-2011, 02:57 PM
#94
Platinum Supporting Vendor
Thread Starter
Right now we are at about 3 weeks delay on the parts.. The third brake light uses the studs to attach into the spoiler like the factory wing does.. It basically just snaps into place..
06-28-2011, 02:58 PM
#95
Platinum Supporting Vendor
Thread Starter
06-28-2011, 09:15 PM
#96
Platinum Supporting Vendor
Thread Starter
Thank you again for everyone who has made this sale happen! Like all sales this one is going to end July 1st. We will no longer accept the discounted price past that date.
06-28-2011, 10:49 PM
#97
I need fiberglass (not c/f) side skits and front spliter to fit a GS. What's the price shipped to 50701?
06-29-2011, 11:20 AM
#98
Racer
Member Since: Jul 2007
Location: Houston TX
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Okay, Is it just me or do the side skirts to fit the regular base C6 flare out in the front a little bit?
To be more specific. When I look at the side skirt replicas that other vendors are selling, they start off very close to the body/fenders in the front and flare towards the back.
When I look at cianci skirts, it flares in the front, bottle necks a bit in the middle and flares at towards the back.
Am I correct or am I just seeing things/ bad camera angle?
To be more specific. When I look at the side skirt replicas that other vendors are selling, they start off very close to the body/fenders in the front and flare towards the back.
When I look at cianci skirts, it flares in the front, bottle necks a bit in the middle and flares at towards the back.
Am I correct or am I just seeing things/ bad camera angle?
06-29-2011, 11:54 AM
#99
Platinum Supporting Vendor
Thread Starter
Okay, Is it just me or do the side skirts to fit the regular base C6 flare out in the front a little bit?
To be more specific. When I look at the side skirt replicas that other vendors are selling, they start off very close to the body/fenders in the front and flare towards the back.
When I look at cianci skirts, it flares in the front, bottle necks a bit in the middle and flares at towards the back.
Am I correct or am I just seeing things/ bad camera angle?
To be more specific. When I look at the side skirt replicas that other vendors are selling, they start off very close to the body/fenders in the front and flare towards the back.
When I look at cianci skirts, it flares in the front, bottle necks a bit in the middle and flares at towards the back.
Am I correct or am I just seeing things/ bad camera angle?
Sort of.. Ours stays constant while the regular zr1 side skirts on a z06 or zr1 give the appearance of flowing back into the car because the fenders are wider and swing out. Our fit to base stay straight and then roll back in around the edge of the front standard fenders.. They look a lot more aggressive.
06-29-2011, 05:14 PM
#100
Please respond to my request for fiberglass skirts and splitter cost delivered to 50701. PM me if you like. Thanks.